DT90053
Clock/calendar
monitor
(hour/minute)
►For L40/L60
Hour and minute data of the clock/calendar are
stored here.
This data is read-only data. It cannot be
overwritten.
A N/A
DT90054
Clock/calendar
monitor
(minute/second)
►For L40/L60
The year, month, day, hour, minute, second
and day-of-the-week data for the
clock/calendar is stored. The built-in
clock/calendar will operate correctly through
the year 2099 and supports leap years. The
clock/calendar can be set by writing a value
using a programming tool software or a
program that uses the F0 (MV) instruction.
As a day of the week is not automatially set on
FPWIN GR, fix what day is set to 00, and set
each value for 00 to 06.
To Next Page
Loading...
