0: Unit No. (Station No.) 1 to 8,
1: Unit No. (Station No.) 9 to 16
A A
DT90220
PC(PLC)
link
Unit
(station)
No. 1 or 9
System regis-
ter 40 and 41
The contents of the system register settings
partaining to the PLC inter-link function for
the various unit numbers are stored as
shown below.
<Example>
When DT90219 is 0
• When the system register 46 in the home
unit is in the standard setting, the values in
the home unit are copied in the system
registers 46 and 47.
When the system register 46 in the home
unit is in the reverse setting, the registers
40 to 45 and 47 corresponding to the home
unit mentioned in the left column will be
changed to 50 to 55 and 57, and the
system register 46 will be set as it is.
Also, the system registers 40 to 45
corresponding to other units will be
changed to the values which the received
values are corrected, and the registers 46
and 57 in the home unit are set for the
registers 46 and 47.
A N/A
DT90221
System regis-
To Next Page
Loading...
