Panasonic HEVC Advance AW-UE160WP - System Settings Configuration; Image and Audio Settings

4. Image screen [Image/Audio]
IP video settings button [Video over IP]
The IP video settings screen [Video over IP] is displayed when the
button is clicked.
→ “IP video settings screen [Video over IP]” (→ page 125)
MoIP settings button [Media over IP]
The MoIP settings screen [Media over IP] is displayed when the
button is clicked.
→ “MoIP settings screen [Media over IP]” (→ page 135)
Audio button [Audio]
The audio setting screen [Audio] is displayed when the button is
clicked.
→ “Audio setting screen [Audio]” (→ page 140)
Paint settings button [Paint]
The paint settings screen [Paint] is displayed when the button is
clicked.
→ “Paint settings screen [Paint]” (→ page 142)
Monitor display settings button [Monitor Display]
The monitor display settings screen [Monitor Display] is displayed
when the button is clicked.
→ “Monitor display setting display [Monitor Display]” (→ page 156)
Lens button [Lens]
The Lens setting screen [Lens] is displayed when the button is
clicked.
→ “Lens setting screen [Lens]” (→ page 157)
UHD crop button [UHD Crop]
The UHD crop setting screen [UHD Crop] is displayed when the
button is clicked.
→ “UHD crop setting screen [UHD Crop]” (→ page 158)
Preset position button [Preset position]
The preset position screen [Preset position] is displayed when the
button is clicked.
→ “Preset position screen [Preset position]” (→ page 160)
5. Collaboration capability [Linkage]
Tracking data output setting button [Tracking Data Output]
The tracking data output setting screen [Tracking Data Output] is
displayed when the button is clicked.
→ “Tracking data output settings screen [Tracking Data Output]”
(→ page 164)
Kairos Cloud connection setting button [Kairos Cloud]
Kairos Cloud connection setting screen [Kairos Cloud] is displayed
when the button is clicked.
→ “Kairos Cloud connection setting screen [Kairos Cloud]”
(→ page 166)
6. User management settings [User mng.]
User authentication button [User auth.]
The user authentication screen [User auth.] is displayed when the
button is clicked.
→ “User authentication screen [User auth.]” (→ page 167)
Host authentication button [Host auth.]
The host authentication screen [Host auth.] is displayed when the
button is clicked.
→ “Host authentication screen [Host auth.]” (→ page 168)
7. Network settings [Network]
Network setup button [Network]
The network setup screen [Network] is displayed when the button is
clicked.
→ “Network setup screen [Network]” (→ page 169)
Advanced network setting button [Advanced]
The advanced network setting screen [Advanced] is displayed when
the button is clicked.
→ “Advanced network setting screen [Advanced]” (→ page 172)
8. Maintenance [Maintenance]
System log button [System log]
The system log screen [System log] is displayed when the button is
clicked.
→ “System log screen [System log]” (→ page 186)
Maintenance button [Maintenance]
The maintenance screen [Maintenance] is displayed when the button
is clicked.
→ “Maintenance screen [Maintenance]” (→ page 187)
Product information button [Product Info.]
The product information screen [Product info.] is displayed when the
button is clicked.
→ “Product information screen [Product info.]” (→ page 188)
Back up button [Backup]
The back up screen [Backup] is displayed when the button is clicked.
→ “Back up screen [Backup]” (→ page 189)
9. Power ON button [Power ON]/Standby button [Standby]
[Power ON]
Turn the unit on.
[Standby]
Set the unit to Standby mode.
When you enter Standby mode, the display will automatically switch
to the live screen [Live]. In addition, the [Setup] button in the live
screen [Live] will be disabled, and you cannot operate the web setup
screen [Setup].
10. Main area
The menu screen is displayed.
111
Web screen configurations (continued)