Panasonic HEVC Advance AW-UE160WP - Files; Maintenance

FILES
SCENE FILE
MODE [LOAD, STORE]
Select the operating mode for SCENE files.
LOAD The setting values of the specified SCENE file number
are applied to the images currently being output.
STORE The setting values of the images currently being output
are applied to the specified SCENE file number.
FILE NO [OFF, 1 to 8]
Set the SCENE file number to do LOAD/STORE.
[OFF] can be set only when [MODE] is [LOAD].
FILE NAME
A file name of up to 15 characters can be set for the SCENE file.
(Alphanumeric characters, spaces, ! # % & ' ( )
*
+ , - . / : ; < = > ? [ ]
_
~
$ @ |)
LIST
The file names set for the SCENE files are shown in a list.
Up to 3 can be shown in the list at a time, and then the list can be
scrolled.
EXECUTE [NO, YES]
Execute with the set content.
USER FILE
MODE [LOAD, STORE]
Select the operating mode for USER files.
LOAD The setting values of the specified USER file number are
applied to the images currently being output.
STORE The setting values of the images currently being output
are applied to the specified USER file number.
FILE NO [1, 2, 3]
Set the USER file number to do LOAD/STORE.
FILE NAME
A file name of up to 15 characters can be set for the USER file.
(Alphanumeric characters, spaces, ! # % & ' ( )
*
+ , - . / : ; < = > ? [ ]
_
~
$ @ |)
LIST
The file names set for the USER files are shown in a list.
EXECUTE [NO, YES]
Execute with the set content.
MAINTENANCE
FAN SETTING
FAN1 [AUTO, LOW, MID, HIGH]
Set the behavior of cooling fan 1 (on the LENS unit side).
FAN2 [AUTO, LOW, MID, HIGH]
Set the behavior of cooling fan 2 (on the base unit side).
AUTO Enable automatic control of the cooling fan.
LOW Operate the cooling fan at low speed.
MID Operate the cooling fan at medium speed.
HIGH Operate the cooling fan at high speed.
<NOTE>
• Even if this is set to [LOW], [MID], or [HIGH], the cooling fan may be
forcibly stopped when the temperature is low.
• Even if this is set to [LOW] or [MID], the cooling fan may be forcibly
operated at [HIGH] when the temperature is high.
DATE/TIME
Set the date and time.
PRESENT
Display the current time.
DATE YY [23 to 99]
Display the “Year” of the date.
DATE MM [01 to 12]
Display the “Month” of the date.
DATE DD [1 to 31]
Display the “Day” of the date.
TIME HH [00 to 23]
Display the “Hour” of the time.
TIME MM [00 to 59]
Display the “Minutes” of the time.
TIME SS [00 to 59]
Display the “Seconds” of the time.
SET EXECUTE [NO, YES]
Set (save) the date and time entered above.
RESET [NO, YES]
Restore the date and time to the factory setting.
INITIALIZE
MENU INITIALIZE [NO, YES]
OSD menu setting values are initialized.
However, the following items are not initialized:
- [FREQENCY], [FORMAT], and [SFP+ MODE] in [BASIC CONFIG]
- Setting items in [NETWORK]
- [FORMAT SELECT] for the output connectors in [OUTPUT]
- Setting values for SCENE files 1 to 8/USER files 1 to 3
- PRESET information (information registered for 100 items)
- Setting values related to the various NETWORK items that are
available for setting from the web screen
- Setting items in [DATE/TIME]
81
Camera menu items (continued)