Web screen configurations
Web setup screen [Setup]
The settings for the unit are selected on this screen.
<NOTE>
• The setting menu operations can be performed only by users whose access level is “1.Administrator”.
For the procedure used to set the access level, refer to page 167.
• If the value of a setting is changed using the OSD menu or a different web browser, the setting value and the displayed value may not match. In that
case, update the setup menu display screen of that web browser.
1
2
3
5
4
6
7
8
9 10
1. Setting status [Setting status]
The setting status screen [Setting status] is displayed when the button
is clicked.
→ “Setting status screen [Setting status]” (→ page 112)
2. System settings [System]
Basic setting button [Basic Config]
The basic setting screen [Basic Config] is displayed when the button
is clicked.
→ “Basic setting screen [Basic Config]” (→ page 112)
Pan/Tilt button [Pan/Tilt]
The Pan/Tilt settings screen [Pan/Tilt] is displayed when the button is
clicked.
→ “Pan/Tilt settings screen [Pan/Tilt]” (→ page 117)
Date&Time button [Date&Time]
The Date & time screen [Date&Time] is displayed when the button is
clicked.
→ “Date & time screen [Date&Time]” (→ page 118)
Live page button [Live page]
The live page screen [Live page] is displayed when the button is
clicked.
→ “Live page screen [Live page]” (→ page 119)
3. Signal settings [Signals]
Output button [Output]
The output setting screen [Output] is displayed when the button is
clicked.
→ “Output” (→ page 119)
Return button [Return]
The return setting screen [Return] is displayed when the button is
clicked.
→ “Return” (→ page 123)
IP Signal button [IP SIGNAL]
The IP signal setting screen [IP SIGNAL] is displayed when the button
is clicked.
→ “IP SIGNAL” (→ page 124)
110
To Next Page
Loading...
