DEFAULT GATEWAY
Set the default gateway for this unit.
The set value is applied to this unit when [SET EXECUTE] is
executed.
COMMON SETTING
DNS [MANUAL, AUTO]
Set whether the DNS server address and domain name are to be
acquired automatically [AUTO] or to be input manually [MANUAL].
The DNS setting needs to be performed if [MANUAL] is set.
When using the DHCP function, if you set to [AUTO], then the DNS
server address will be acquired automatically.
Consult the system administrator regarding the settings.
PRIMARY
SECONDARY
DOMAIN
Display the IP address/domain name for the DNS server.
The settings cannot be changed in the OSD menu, so change them
from the web screen if they are to be changed.
HTTP PORT [1 to 65535]
Allocate the port numbers individually.
The following port numbers cannot be set because they are used by
this unit:
20, 21, 23, 25, 42, 53, 67, 68, 69, 110, 123, 161, 162, 443, 546, 547,
554, 995, 5960 to 5985, 7960 to 8060, 10669, 10670, 11900, 59000
to 61000
HTTPS PORT [1 to 65535]
Allocate the port numbers individually.
The following port numbers cannot be set because they are used by
this unit:
20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 546, 547,
554, 995, 5960 to 5985, 7960 to 8060, 10669, 10670, 11900, 59000
to 61000
OUTPUT
12G SDI OUT/SFP+
Make the settings for output from the 12G SDI OUT/SFP+ connector.
FORMAT SELECT
Set the output format.
The following formats can be set depending on the settings in
[FORMAT] in [BASIC CONFIG].
Frequency
System Format
Format
(12G SDI OUT/SFP+)
60Hz 2160/60p 2160/60p
1080/60p
1080/60p 1080/60p
59.94Hz 2160/59.94p 2160/59.94p
1080/59.94p
*
1
2160/29.97p 2160/29.97p
1080/29.97p
1080/119.88p 1080/59.94p
*
3
1080/59.94p 1080/59.94p
1080/59.94i
1080/29.97p 1080/29.97p
720/59.94p 720/59.94p
50Hz 2160/50p 2160/50p
1080/50p
*
2
2160/25p 2160/25p
1080/25p
1080/100p 1080/50p
*
3
1080/50p 1080/50p
1080/50i
1080/25p 1080/25p
720/50p 720/50p
24Hz 2160/24p 2160/24p
1080/24p
1080/24p 1080/24p
23.98Hz 2160/23.98p 2160/23.98p
1080/23.98p
1080/23.98p 1080/23.98p
*
1
When [UHD CROP] is [CROP(720)], output is 720/59.94p.
*
2
When [UHD CROP] is [CROP(720)], output is 720/50p.
*
3
For 119.88p (or 100p), “Frame 1” is output with the frame rate cut
to half (59.94p (or 50p)).
HDR OUTPUT SELECT
[SDR(709), HDR(709), HDR(2020)]
Select the signal output when [HDR] is [ON].
SDR(709) Selects the SDR output signal.
HDR(709) Selects the HDR output signal (BT.709 equivalent color
gamut).
HDR(2020) Selects the HDR output signal (BT.2020 equivalent color
gamut).
<NOTE>
• This cannot be set when the [BASIC CONFIG] – [HDR] is [OFF].
• [HDR(2020)] can be selected only when [BASIC CONFIG] –
[GAMUT] is [WIDE_G2].
52
Camera menu items (continued)
To Next Page
Loading...
