LENS
FOCUS MODE [MANUAL, AUTO]
Select manual/auto for the focus adjustment function.
MANUAL Adjust focus manually.
AUTO Always adjust focus automatically.
AF SENSITIVITY [NORMAL, STABLE]
Select the conformability mode for auto focusing function.
NORMAL Focusing is with a standard conformability.
STABLE Focusing is with a priority placed on stability.
ZOOM MODE [Opt.ZOOM, i.ZOOM, D.ZOOM]
Set the maximum magnification rate for zoom.
Opt.ZOOM Use only optical zoom.
Optical zoom up to 20× is possible.
i.ZOOM Enable the i.Zoom function.
When this function is enabled, digital zoom is used while
reducing image degradation.
When [BASIC CONFIG] – [FORMAT] is 2160/59.94p,
2160/29.97p, 2160/50p, 2160/25p, 2160/24p,
2160/23.98p
Up to 24× zoom is possible combining optical zoom and
digital zoom.
• When [BASIC CONFIG] – [FORMAT] is other than one
of these, up to 32× zoom is possible combining optical
zoom and digital zoom.
D.ZOOM Enable the digital zoom function.
Higher digital zoom magnifications will result in coarser
images.
MAX DIGITAL ZOOM
[×2, ×3, ×4, ×5, ×6, ×7, ×8, ×9, ×10]
Set the maximum digital zoom magnification.
This is only enabled when [ZOOM MODE] is set to [D.ZOOM].
<NOTE>
• Higher digital zoom magnifications will result in coarser images.
DIGITAL EXTENDER [OFF, ×1.4, ×2.0]
Make settings for the digital extender function.
OFF Turn the digital extender function OFF.
×1.4 The digital zoom will be fixed at 1.4×.
×2.0 The digital zoom will be fixed at 2.0×.
This is only enabled when [ZOOM MODE] is set to [Opt.ZOOM].
O.I.S. [OFF, ON]
Set OFF/ON for the optical image stabilization (O.I.S.) function.
O.I.S. MODE
[O.I.S.(STABLE), O.I.S.(PAN/TILT), HYBRID(STABLE),
HYBLID(PAN/TILT)]
Sets the mode for optical image stabilization (O.I.S.) and roll direction
electronic image stabilization (E.I.S.).
O.I.S.
(STABLE)
Turns the optical image stabilization (O.I.S.) function ON.
Use with a pan/tilt fixed shooting scene.
O.I.S.
(PAN/TILT)
Turns the optical image stabilization (O.I.S.) function ON.
Use with a scene for increasing the image stabilization
effect during a shooting while performing the pan/tilt
operation.
HYBRID
(STABLE)
Turns the optical image stabilization (O.I.S.) function
and roll direction electronic image stabilization (E.I.S.)
function ON.
Use with a pan/tilt fixed shooting scene.
HYBRID
(PAN/TILT)
Turns the optical image stabilization (O.I.S.) function
and roll direction electronic image stabilization (E.I.S.)
function ON.
Use with a scene for increasing the image stabilization
effect during a shooting while performing the pan/tilt
operation.
<NOTE>
• In [O.I.S.(STABLE)] or [HYBRID(STABLE)] mode, the optical image
stabilization (O.I.S.) function’s level of correction is reduced during
pan/tilt operations in order to minimize the convergence resulting
from image stabilization during pan/tilt operations.
• In [O.I.S.(PAN/TILT)] or [HYBRID(PAN/TILT)] mode, as importance
is given to heighten the image stabilization effect during pan/tilt
operations, the convergence resulting from image stabilization
during pan/tilt control may be a cause for concern in some scenes.
Use [O.I.S.(STABLE)] or [HYBRID(STABLE)] for scenes where
the convergence resulting from image stabilization needs to be
restrained.
ND FILTER [THROUGH, 1/4, 1/16, 1/64]
Set the transmittance of the lens' built-in ND (neutral density) filter.
The filter switches when the setting is fixed.
THROUGH Do not set ND filter.
1/4 Set ND filter transmittance to 1/4.
1/16 Set ND filter transmittance to 1/16.
1/64 Set ND filter transmittance to 1/64.
<NOTE>
• This is enabled only when [PAINT] – [GAIN SETTING] – [DAY/
NIGHT] is [DAY].
69
Camera menu items (continued)
To Next Page
Loading...
