Camera menu items
Top Menu screen
BASIC CONFIG
Set basic configuration items for the camera (system configuration
items).
NETWORK
Set basic configuration items related to networks.
OUTPUT
Set items for the various output connectors.
RETURN
Set items related to return images.
AUDIO
Set items related to audio.
IP SIGNAL
Set items related to IP related image/audio output.
PAINT
Set items related to camera images.
LENS
Set items related to lenses.
MONITOR DISPLAY
Set items for status indicators/indication displays, etc.
TRACKING DATA OUTPUT
Set items related to tracking data output.
CROP
Set items related to CROP (cropping).
PAN/TILT
Set items related to PAN/TILT.
PRESET
Set items related to PRESET.
FILES
Set items related to SCENE file/USER file.
MAINTENANCE
Set items related to maintenance.
<NOTE>
• During IP video transmission (H.264/H.265/M-JPEG), there may be
some delays in OSD menu operations. Smooth OSD menu operations
become possible when you set [IP SIGNAL] – [IP(H.264/H.265)] –
[CHAR] to [OFF]. (→ page 58, page 124)
BASIC CONFIG
FREQUENCY
[60Hz, 59.94Hz, 50Hz, 24Hz, 23.98Hz]
This item is selected to switch the frame frequency.
• For details on how to change the frequency, refer to “Changing the
frequency” (→ page 50).
FORMAT
For [60Hz]
2160/60p, 1080/60p
For [59.94Hz]
2160/59.94p, 2160/29.97p, 1080/119.88p, 1080/59.94p, 1080/29.97p,
720/59.94p
For [50Hz]
2160/50p, 2160/25p, 1080/100p, 1080/50p, 1080/25p, 720/50p
For [24Hz]
2160/24p, 1080/24p
For [23.98Hz]
2160/23.98p, 1080/23.98p
<NOTE>
• Streaming stops when changing the system format.
• For details on how to change the format, refer to “Changing the
format” (→ page 51).
SFP+ MODE [12G OUTPUT, ST2110]
Set the operating mode for the SFP+ connector.
12G OUTPUT The same video signal is output as the video output
from the 12G SDI OUT connector.
ST2110 Video/audio data that conforms with SMPTE ST2110
is output.
<NOTE>
• This unit automatically restarts when [SFP+ MODE] is changed.
• The following functions cannot be used when [12G OUTPUT] is
selected:
- SMPTE ST2110 video/audio output
- SMPTE ST2110 video input (RETURN) (→ page 58)
- PTP synchronizing (→ page 50)
V‑LOG [OFF, ON]
Set the V-LOG mode.
OFF This setting allows detailed picture quality adjustments on
the camera.
ON Set a gamma curve that provides broad tones and a wide
range of latitude (exposure range).
Grading will be necessary after shooting.
<NOTE>
• This cannot be set when the [BASIC CONFIG] – [HDR] is [ON].
• Functions to adjust picture quality are limited when
[BASIC CONFIG] – [V-LOG] is [ON].
V‑LOG PAINT SW [OFF, ON]
Select whether to make it possible to make settings in the [PAINT]
menu when [BASIC CONFIG] – [V-LOG] is [ON].
<NOTE>
• This cannot be set when the [BASIC CONFIG] – [V-LOG] is [OFF].
HDR [OFF, ON]
Enable/disable the HDR mode.
<NOTE>
• This cannot be set when the [BASIC CONFIG] – [V-LOG] is [ON].
48
To Next Page
Loading...
