Panasonic HEVC Advance AW-UE160WP - Page 68

PAINT SWITCH
FLARE [OFF, ON]
Set OFF/ON for flare compensation.
GAMMA [OFF, ON]
Select ON/OFF for the gamma mode.
BLACK GAMMA [OFF, ON]
Set ON/OFF for the gamma curve for dark areas.
KNEE [OFF, ON]
Set ON/OFF for the operating mode for gradation compression
(knee).
WHITE CLIP [OFF, ON]
Set ON/OFF for the white clip function.
DRS [OFF, ON]
Set ON/OFF for the DRS function which makes appropriate
corrections when recording video that has a large light/dark contrast.
DETAIL [OFF, ON]
Set ON/OFF for image contour (image sharpness) adjustments.
SKIN TONE DETAIL [OFF, ON]
Set ON/OFF for the skin tone detail function.
MATRIX [OFF, ON]
Set ON/OFF for the matrix (linear matrix/color correction).
LINEAR MATRIX [OFF, ON]
Set ON/OFF for the linear matrix function.
COLOR CORRECT [OFF, ON]
Set ON/OFF for the color correction function.
HDR PAINT
Set the image quality for HDR.
<NOTE>
• This is enabled only when [HDR] is [ON].
• This is disabled when [V-LOG] is [ON].
HLG MODE [FIX, VAR]
Select the HLG setting mode.
FIX Fixed mode
VAR Variable mode
SDR CONVERT MODE [FIX, VAR]
Select the mode for converting to SDR.
FIX Fixed mode
VAR Variable mode
GAMMA/BLACK GAMMA
The setting is disabled when [FIX] is selected in [HLG MODE] and it
cannot be set.
BLACK GAMMA [OFF, ON]
Set ON/OFF for black gamma.
MASTER BLACK GAMMA [–32 to +32]
Adjust the master black gamma correction level.
R BLACK GAMMA [–32 to +32]
Make adjustments to the black gamma correction level for the
Rch.
B BLACK GAMMA [–32 to +32]
Make adjustments to the black gamma correction level for the Bch.
KNEE
The setting is disabled when [FIX] is selected in [HLG MODE] and it
cannot be set.
KNEE [OFF, ON]
Set ON/OFF for knee.
KNEE POINT [60.00 to 100.00 (0.25% step)]
Set the knee point position.
KNEE SLOPE [0 to 199]
Set the incline of knee.
SDR CONVERT
The setting is disabled when [FIX] is selected in [SDR CONVERT
MODE] and it cannot be set.
GAIN
[0dB, –5dB, –6dB, –7dB, –8dB, –9dB, –10dB, –11dB, –12dB]
Set the gain of SDR images.
POINT [0 to 100]
Set the image level to start SDR image compression.
SLOPE [0 to 127]
Set the incline for compression of SDR images.
BLACK OFFSET [–100 to +100]
Adjust the black level offset of SDR images.
68
Camera menu items (continued)