CBR/VBR [CBR, VBR]
Set the transmission mode for H.265 images.
CBR Transmit with the bit rate set for H.265 images.
VBR Transmit with the bit rate set for H.265 images and also
vary the bit rate according to the images to be recorded.
Factory settings: VBR
Frame rate [24fps, 25fps, 30fps, 50fps, 60fps]
Set the frame rate for H.265 images.
59.94Hz 30fps, 60fps
50Hz 25fps, 50fps
24/23.98Hz 24fps
Factory settings:
For 59.94Hz: 30fps
For 50Hz: 25fps
For 24/23.98Hz: 24fps
<NOTE>
• [60fps(50fps)] cannot be selected when the video format is
[29.97p(25p)].
Max bit rate(per client)
[2048kbps, 4096kbps, 8192kbps, 10240kbps, 12800kbps,
14336kbps, 20480kbps, 24576kbps, 25600kbps, 51200kbps,
76800kbps]
Specify the H.265 bit rate per client.
Factory settings:
H.265(1): 14336kbps
H.265(2): 8192kbps
Transmission type
The same as [H.264] [Transmission type] (→ page 128).
Unicast port(Image) The same as [H.264] [Unicast port(Image)]
(→ page 128).
Unicast port(Audio) The same as [H.264] [Unicast port(Audio)]
(→ page 128).
Multicast address
The same as [H.264] [Multicast address] (→ page 128).
Multicast port
The same as [H.264] [Multicast port] (→ page 129).
Multicast TTL/HOPLimit
The same as [H.264] [Multicast TTL/HOPLimit] (→ page 129).
z RTMP
Make RTMP/RTMPS transmission settings.
Server setup
The setting is confirmed with the [Set] button.
<NOTE>
• Switch to the appropriate method of registering RTMP/RTMPS
transmission server information suited to the setting information
notified from the RTMP/RTMPS transmission server you are using.
• The Stream Key setting field is displayed only when [Type2] is set.
• When performing RTMP transmissions, set the Server URL and
Stream key acquired from the external application, and then click
the [start] button for [SRT/MPEG2-TS/RTMP] in the live screen
[Live].
• When performing RTMP transmissions, enable connection with the
network in the [Network] screen.
URL type [Type1, Type2]
Select the method for registering the information for the RTMP/
RTMPS transmission server.
Type1 Specify to set the server URL and RTMP/RTMPS stream
key as a set in [Server URL].
Type2 Specify to individually set the server URL and RTMP/
RTMPS stream key in [Server URL] and [Stream Key].
URL
Server URL Set the URL for the RTMP/RTMPS server to be
transmitted to.
Stream key The stream key obtained from the RTMP/RTMPS server
is set during streaming only when the service is set to
[Type2].
130
Web screen configurations (continued)
To Next Page
Loading...
