MASTER GAMMA [0.15 to 0.75]
Adjust the master gamma correction level.
Factory settings: 0.45
R GAMMA [–75 to +75]
Set the gamma for the Rch.
Factory settings: 0
B GAMMA [–75 to +75]
Set the gamma for the Bch.
Factory settings: 0
BLACK GAMMA [OFF, ON]
Select ON/OFF for the gamma curve for dark areas.
Factory settings: OFF
MASTER BLACK GAMMA [–48 to +48]
Adjust the master black gamma correction level.
– 48 to –1 Compresses dark parts.
+1 to +48 Expands dark parts.
Factory settings: 0
R BLACK GAMMA [–20 to +20]
Make adjustments to the black gamma correction level for the Rch.
Factory settings: 0
B BLACK GAMMA [–20 to +20]
Make adjustments to the black gamma correction level for the Bch.
Factory settings: 0
BLACK GAMMA RANGE [1 to 3]
Set the maximum level of compression/expansion for the gamma
curve for dark areas.
1 About 20%
2 About 30%
3 About 40%
Factory settings: 1
INITIAL GAMMA [4.0, 4.5, 5.0]
Set the rising slope for the gamma curve.
This is only enabled when [GAMMA MODE SELECT] is set to [HD].
Factory settings: 4.0
GAMMA/KNEE
z GAMMA/BLACK GAMMA
<NOTE>
• For all of the GAMMA/BLACK GAMMA items, setting is not possible
when [V-LOG] is [On] and [V-LOG PAINT SW] is [Off].
• For all of the GAMMA/BLACK GAMMA items, setting is not possible
when [HDR] is [On].
GAMMA [OFF, ON]
Select ON/OFF for the gamma mode.
Factory settings: OFF
GAMMA MODE SELECT
[HD, NORMAL, CINEMA1, CINEMA2]
Select the gamma curve type.
HD HD (High Definition) video gamma characteristic.
NORMAL Standard gamma characteristic.
CINEMA1 High contrast gamma characteristic.
CINEMA2 Sedate gamma characteristic.
Factory settings: HD
151
Web screen configurations (continued)
To Next Page
Loading...
