Setting the Connection Method
[Connection]
1. Set the method to access the camera in [Connection].
HTTP: Only HTTP connection is possible.
HTTPS: Only HTTPS connection is possible.
<NOTE>
• When using an HTTPS connection, network connection with the
AW-RP120, AW-RP50, and AK-HRP200 will be disabled.
2. Set the Port No. to be used with HTTPS in [HTTPS port].
Port No. that can be selected: 1 to 65535
The following port numbers are used by the unit so they cannot be
used.
20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 443, 546,
547, 554, 995, 5960 to 5985, 7960 to 8060, 10669, 10670, 11900,
59000 to 61000
Factory settings: 443
3. Set the encryption protocol used with HTTPS in [HTTPS
mode].
TLS1.0/1.1/1.2: Connection with TLS1.0/1.1/1.2 is possible.
TLS1.2: Connection with TLS1.2 is possible.
4. Click the [Set] button.
The camera restarts and access to the camera via HTTPS is enabled.
<NOTE>
• This unit will restart if the connection method is changed.
• Using a self‑signed certificate
A warning screen is displayed when accessing the camera by
HTTPS for the first time. Install the self-signed certificate (security
certificate) in your personal computer in accordance with the screen
instructions. (→ page 184)
• Using a server certificate
Install the Certificate Authority (CA) root certificate or intermediate
certificate in your web browser in advance. Follow the Certificate
Authority (CA) procedures to acquire and install root certificates and
intermediate certificates.
• When accessing the camera by HTTPS, the image display speed
and frame rate of the moving image may reduce.
• When accessing the camera by HTTPS, it may take some time for
the images to be displayed.
• When accessing the camera by HTTPS, images may be disturbed
and sound may be interrupted.
• The maximum number of cameras that can be connected
simultaneously depends on the maximum image size and
distribution format.
Accessing the Camera by HTTPS
1. Launch the web browser in your personal computer.
2. Input the camera’s IP address in the address bar of the
web browser.
Input address: https://192.168.0.10/
<NOTE>
• When the HTTPS port No. is changed from “443”, input “https://
camera IP address: Port No.” in the address bar.
E.g. https://192.168.0.11:61443
• When this unit is in a local network, set a proxy server from the web
browser (menu bar: [Tools] - [Internet Options]) to ensure that a
proxy server is not used for a local address.
3. Press the [Enter] key.
The live screen [Live] is displayed.
The security certificate is installed when the security warning screen
is displayed. (→ page 184)
When [User auth.] is set to [On], the user name and password input
screen is displayed before the live screen [Live] appears.
<NOTE>
• When HTTPS is used, screen and image display may slow down
and image update interval (frame rate) may also slow down.
183
Web screen configurations (continued)
To Next Page
Loading...
