Camera/pan‑tilt head control:
IP connecting
cable
• When there is a PoE++ Ethernet hub
LAN cable
*
1
(category 5e or above, straight
cable), max. 100 m (328 ft)
• When there is no PoE++ Ethernet hub
LAN cable
*
1
(category 5e or above, straight
cable), max. 100 m (328 ft)
AW protocol
connecting cable
LAN cable
*
1
(category 5e or above, straight
cable), max. 1000 m (3280 ft)
*
1
Use of an STP (shielded twisted pair) cable is recommended.
• Use category 6 or better for 4K video transmissions.
Pan/tilt operation speed:
Speed range: 0.08°/s to 180°/s (During manual
operation)
• 3 speed modes installed
Normal: 60°/s, Fast1: 90°/s, Fast2: 180°/s
• Note that the operating noise may be loud in high
speed.
• If the operating noise is disturbing, use the Normal
mode.
Panning range
: ±175°
Tilting range
: –30° to 210°
• Depending on the pan or tilt position, the camera
may be reflected in the image.
Quietness: NC35 or less
• NC25 or less with P/T pause
207
Specifications (continued)
To Next Page
Loading...
