Panasonic HEVC Advance AW-UE160WP - Page 30

• When “Streaming mode” is set to “High Bandwidth NDI”
Settings High Bandwidth NDI JPEG(1)
Resolution
1920×1080
— 1280×720
640×360
Frame rate
System
frequency
60Hz/
59.94Hz
—
30fps
15fps
5fps
1fps
System
frequency
50Hz
—
25fps
12.5fps
5fps
1fps
System
frequency
29.97Hz
—
30fps
15fps
5fps
1fps
System
frequency
25Hz
—
25fps
12.5fps
5fps
1fps
System
frequency
24/23.98Hz
—
24fps
12fps
4fps
1fps

SMPTE ST2110 specifications
Point Sub‑point Specifications
Supported standards
SMPTE ST2110 SMPTE ST2110-10/-20/-21/-30
PTP SMPTE ST2059-2
NMOS IS-04/IS-05
Number of outputs (TX)
Image 3
Audio 2
Supplementary data —
Number of inputs (RX)
Image 1
Audio —
Supplementary data —
Output specifications
Image formats (MAIN)
1080/60p, 1080/59.94p, 50p, 1080/59.94i, 50i, 1080/29.97p
*
1
, 25p
*
1
,
1080/24p, 1080/23.98p
*
1
, 720/59.94p, 50p
Image formats (CROP)
1080/60p, 1080/59.94p, 50p, 1080/59.94i, 50i, 1080/29.97p
*
1
, 25p
*
1
,
1080/24p, 1080/23.98p
*
1
, 720/59.94p, 50p
Image formats (MONITOR)
1080/60p, 1080/59.94p, 50p, 1080/59.94i, 50i, 1080/29.97p
*
1
, 25p
*
1
,
1080/24p, 1080/23.98p
*
1
, 720/59.94p, 50p
Audio specifications MIC1/2 PCM/48 kHz/24bit/1ch x2
Input specifications
Image formats (RETURN) 1080/59.94p, 1080/50p
Audio specifications MIC1/2 —
*
1
Native output
<NOTE>
• A separate optional software key (AW-SFU60) needs to be purchased to enable SMPTE ST2110 functionality.
Use EasyIP Setup Tool Plus to activate AW-SFU60. Refer to the operating instructions available on the EasyIP Setup Tool Plus download page for
activation instructions.
30
Parts and their functions (continued)