COLOR TEMP SETTING
<NOTE>
• For all of the COLOR TEMP SETTING items, setting is not possible
when [V-LOG] is [ON] and [V-LOG PAINT SW] is [OFF].
COLOR TEMP ACH/BCH
Set the color temperature and gain when the [WHITE BALANCE
MODE] is [AWB A] or [AWB B].
COLOR TEMP ACH [2000K to 15000K]
Set the color temperature when [WHITE BALANCE MODE] is [AWB
A].
R GAIN ACH [–400 to +400]
This enables adjustments to R Gain when [WHITE BALANCE
MODE] is [AWB A].
B GAIN ACH [–400 to +400]
This enables adjustments to B Gain when [WHITE BALANCE
MODE] is [AWB A].
G AXIS ACH [–400 to +400]
You can adjust the gain in the G-Mg direction when the [WHITE
BALANCE MODE] is [AWB A].
COLOR TEMP BCH [2000K to 15000K]
Set the color temperature when [WHITE BALANCE MODE] is [AWB
B].
R GAIN BCH [–400 to +400]
This enables adjustments to R Gain when [WHITE BALANCE
MODE] is [AWB B].
B GAIN BCH [–400 to +400]
This enables adjustments to B Gain when [WHITE BALANCE
MODE] is [AWB B].
G AXIS BCH [–400 to +400]
You can adjust the gain in the G-Mg direction when the [WHITE
BALANCE MODE] is [AWB B].
RGB GAIN CONTROL SETTING
<NOTE>
• For all of the RGB GAIN CONTROL SETTING items, setting is not
possible when [V-LOG] is [ON] and [V-LOG PAINT SW] is [OFF].
G GAIN REL CONTROL SW [OFF, ON]
Set ON/OFF for the relative value control of the G gain.
RGB GAIN PRESET
Set the gain when the [WHITE BALANCE MODE] is [3200K], [5600K],
or [VAR].
R GAIN [–1000 to +1000]
This enables the R gain to be adjusted.
G GAIN [–1000 to +1000]
This enables the G gain to be adjusted.
B GAIN [–1000 to +1000]
This enables the B gain to be adjusted.
RGB GAIN ACH/BCH
Set the gain when the [WHITE BALANCE MODE] is [AWB A] or
[AWB B].
R GAIN ACH [–1000 to +1000]
You can adjust the R gain when the [WHITE BALANCE MODE] is
[AWB A].
G GAIN ACH [–1000 to +1000]
You can adjust the G gain when the [WHITE BALANCE MODE] is
[AWB A].
B GAIN ACH [–1000 to +1000]
You can adjust the B gain when the [WHITE BALANCE MODE] is
[AWB A].
GAIN OFFSET ACH [OFF, ON]
When auto white balance is performed by setting [WHITE
BALANCE MODE] to [AWB A], set the values for R gain and B gain.
OFF Makes the [R GAIN ACH] and [B GAIN ACH] values [0].
ON Leaves the values set in [R GAIN ACH] and [B GAIN
ACH] as they are.
R GAIN BCH [–1000 to +1000]
You can adjust the R gain when the [WHITE BALANCE MODE] is
[AWB B].
G GAIN BCH [–1000 to +1000]
You can adjust the G gain when the [WHITE BALANCE MODE] is
[AWB B].
B GAIN BCH [–1000 to +1000]
You can adjust the B gain when the [WHITE BALANCE MODE] is
[AWB B].
GAIN OFFSET BCH [OFF, ON]
When auto white balance is performed by setting [WHITE
BALANCE MODE] to [AWB B], set the values for R gain and B gain.
OFF Makes the [R GAIN BCH] and [B GAIN BCH] values [0].
ON Leaves the values set in [R GAIN BCH] and [B GAIN
BCH] as they are.
61
Camera menu items (continued)
To Next Page
Loading...
