PRESET DIGITAL EXTENDER [OFF, ON]
Turns the preset digital extender function OFF/ON.
When set to [ON], the digital extender function configuration will be
recalled when regenerating the preset memory.
When set to [OFF], the digital extender function configuration will not
be recalled when storing the preset memory.
PRESET CROP [OFF, ON]
When the preset memory is played back, set whether the
reproduction of content set in the various [UHD CROP] menus is
OFF/ON.
When set to [ON], the content set in the various [UHD CROP] menus
is reproduced when preset memory is played back.
When set to [OFF], the content set in the various [UHD CROP] menus
is not reproduced when preset memory is played back, with the
current values being kept.
<NOTE>
• This is only enabled when [CROP] – [UHD CROP] is set to
[CROP(1080)] or [CROP(720)].
• When [CROP] – [UHD CROP] is [OFF] or [CROP(1080)] and preset
memory is registered and preset playback is executed when [UHD
CROP] is [CROP(720)], then, even if [PRESET CROP] is [ON], the
content set in each menu of [UHD CROP] is not recalled.
• When [CROP] – [UHD CROP] is [CROP(720)] and preset memory
is registered and preset playback is executed when [UHD CROP] is
[CROP(1080)], then, even if [PRESET CROP] is [ON], the content
set in each menu of [UHD CROP] is not recalled.
PRESET THUMBNAIL UPDATE [OFF, ON]
Turn OFF/ON the function for registering the still image (thumbnail)
for the images being output when a preset memory is registered.
When set to [ON], the still image (thumbnail) for the images being
output is registered when registering a preset memory.
When set to [OFF], the still image (thumbnail) for the images being
output is not registered when registering a preset memory, but rather
the still image (thumbnail) previously registered is maintained.
<NOTE>
• When [IP SIGNAL] – [IP(H.264/H.265)] – [CHAR] is [ON], the
character strings of OSD menu displayed during the generation
of still images (thumbnails) and CROP frames are imported to the
thumbnails.
• When [CROP] – [UHD CROP] is [CROP(1080)] or [CROP(720)], the
still image for the images (FULL or CROP) specified in [CROP] –
[IP(H.264/H.265) OUT1] is registered.
• Still images (thumbnails) registered in the preset memory are
deleted when user files are uploaded with a web screen, etc.
(→ page 189)
• When continuous registration of preset memories is performed
(continuous registration within 3 seconds), still images (thumbnails)
for the second preset memory on may not be registered, with black
still images (thumbnails) being used instead.
PRESET NAME [RESET, HOLD]
When registering a preset memory, set whether to reset the
previously registered preset name or keep it.
RESET When registering a preset memory, reset the previously
registered preset name.
The preset name after resetting will be [PRESET
***
].
(
***
is a 3 digit preset number: 001 to 100)
HOLD When registering a preset memory, keep the previously
registered preset name.
<NOTE>
• The factory default setting for the preset name is [PRESET
***
].
(
***
is a 3 digit preset number: 001 to 100)
• The registration of preset names can be done in the web browser.
0 to 9, A to Z, a to z, _ , and space
PRESET IRIS [OFF, ON]
When the preset memory is played back, set whether the
reproduction of the values in the various menus related to IRIS is
OFF/ON.
When set to [ON], the values set in the various menus below are
reproduced when preset memory is played back.
- [PAINT] – [IRIS] – [AUTO IRIS]
- [PAINT] – [IRIS] – [WINDOW SELECT]
- [PAINT] – [IRIS] – [PICTURE LEVEL]
- [PAINT] – [IRIS] – [IRIS SPEED]
<NOTE>
• Its setting takes effect when [MODE A] or [MODE B] has been
selected as the [PRESET SCOPE] setting.
PRESET SHUTTER [OFF, ON]
When the preset memory is played back, set whether the
reproduction of the SHUTTER setting value is OFF/ON.
<NOTE>
• Its setting takes effect when [MODE A] has been selected as the
[PRESET SCOPE] setting.
• SHUTTER values are reproduced only when the frame rate when
the preset memory was registered and the frame rate when playing
back the preset memory match.
PRESET ZOOM MODE [MODE A, MODE B]
Select the zoom operation for when preset memory is recalled.
MODE A Perform smooth zoom operation to match the behavior
of pan/tilt.
MODE B Perform constant speed zoom operation to match the
behavior of pan/tilt.
FREEZE DURING PRESET [OFF, ON]
Turn the function for freezing images during preset playback OFF/ON.
When this is set to [ON], preset playback is performed with a still
of the image immediately preceding the start of preset playback
being output. The image freeze is released when preset playback is
finished.
78
Camera menu items (continued)
To Next Page
Loading...
