Panasonic HEVC Advance AW-UE160WP - Page 90

Top Menu Camera menu Item Factory setting Selection items
SCENE
FILE
USER
FILE
IP SIGNAL NDI FORMAT SELECT 2160/59.94p or 2160/50p [System Format] [NDI]
2160/60p 2160/60p
*
9
1080/60p
1080/60p 1080/60p
2160/59.94p 2160/59.94p
*
1, 2
1080/59.94p
2160/29.97p 2160/29.97p
*
3
1080/29.97p
1080/119.88p 1080/59.94p
*
10
1080/59.94p 1080/59.94p
1080/29.97p 1080/29.97p
720/59.94p 720/59.94p
2160/50p 2160/50p
*
4, 5
1080/50p
2160/25p 2160/25p
*
6
1080/25p
1080/100p 1080/50p
*
10
1080/50p 1080/50p
1080/25p 1080/25p
720/50p 720/50p
2160/24p 2160/24p
*
7
1080/24p
1080/24p 1080/24p
2160/23.98p 2160/23.98p
*
8
1080/23.98p
1080/23.98p 1080/23.98p
IP(H.264/H.265) OUTPUT ITEM MENU ONLY MENU ONLY, STATUS
CHAR ON OFF, ON
ST2110 MOIP MODE OFF OFF, ON
MAIN VIDEO TX
FORMAT 1080/59.94p
or 1080/50p
[System Format] [ST2110]
1080/59.94p 1080/59.94p
1080/59.94i
1080/50p 1080/50p
1080/50i
For System Formats other than the above,
display only
CROP VIDEO TX
FORMAT 1080/59.94p
or 1080/50p
Display only
MONITOR VIDEO TX
FORMAT 1080/59.94p
or 1080/50p
Display only
RET VIDEO RX
FORMAT 1080/59.94p
or 1080/50p
Display only
*
1
When [UHD CROP] is [CROP(1080)], output is 1080/59.94p.
*
2
When [UHD CROP] is [CROP(720)], output is 720/59.94p.
*
3
When [UHD CROP] is [CROP(1080)], output is 1080/29.97p.
*
4
When [UHD CROP] is [CROP(1080)], output is 1080/50p.
*
5
When [UHD CROP] is [CROP(720)], output is 720/50p.
*
6
When [UHD CROP] is [CROP(1080)], output is 1080/25p.
*
7
When [UHD CROP] is [CROP(1080)], output is 1080/24p.
*
8
When [UHD CROP] is [CROP(1080)], output is 1080/23.98p.
*
9
When [UHD CROP] is [CROP(1080)], output is 1080/60p.
*
10
For 119.88p (or 100p), “Frame 1” is output with the frame rate cut to half (59.94p (or 50p)).
90
Camera menu item table (continued)