Classified
Code
ST1 ST2 ST3 ST4 Content
U10 10 00 00 00 No Paper Error
U11 11 x 00 00
Paper Feed Jam (when paper does not reach Waiting Sensor): ST2 shows the rest
numbers (approx.) of paper.
U12 12 x 00 00
Jam 1 (when paper does not reach Starting Position Sensor): ST2 shows the rest
numbers (approx.) of paper.
U13 13 x 00 00
Jam 2 (when paper does not reach Paper Jam Sensor): ST2 shows the rest numbers
(approx.) of paper.
U14 14 x 00 00
Jam 3 (when paper does not reach Ending (Front) Position Sensor): ST2 shows
the rest numbers (approx.) of paper.
U15 15 x 00 00
Jam 4 (when paper does not reach Ending (Rear) Position Sensor): ST2 shows
the rest numbers (approx.) of paper.
U16 16 x 00 00
Scan-out Jam 1 (when paper does not pass Ending (Front) Position Sensor):
ST2 shows the rest numbers (approx.) of paper.
U17 17 x 00 00
Scan-out Jam 2 (when paper does not pass Ending (Rear) Position Sensor):
ST2 shows the rest numbers (approx.) of paper.
U18 18 x 00 00 Paper remain in this scanner *(ST2: Paper position Information)
Error Code
U20 19 00 00 00 Skew Error
U23 1C x x 00
Double Feed Error: ST2 shows the rest numbers (approx.) of paper (ST3: 0=Original
at wait position 1=No original at wait position 2=Length 3=Supersonic sensor)
U32
22 00 00 00 Post Imprinter Door Open
U30
20 00 00 00 Front Door Open
U34 24 00 00 00 Pre Imprinter Door Open
F40 30 x 00 00 Hopper Drive Error
F50
40 00 00 00 Waiting Sensor Error
F51
41 00 00 00 Staring Position Sensor Error
F52 42 00 00 00 Skew (R) Sensor Error
F53
43 00 00 00 Skew (L) Sensor Error
F54
44 00 00 00 Paper Jam Sensor Error
F55 45 00 00 00 Ending (Front) Position Sensor Error
F56 46 00 00 00 Ending (Rear) Position Sensor Error
F70
47 x 00 00 Size Detector Error (ST2: Size Detector Information)
F80 60 x x Double Feed Sensor Error (ST2: DA output value, STS3: AD input value)
F61 51 00 00 00 Front-side Black Level Error
F63 53 00 00 00 Back-side Black Level Error
(ST2: 0=up, 1=down)
To Next Page
Loading...
