Panasonic KX-NCP1000 - Page 299

Item Parameter Description
Date & Time Set Year/Month/Date/Hour/
Minute
The date and time set on the PC can be used by default.
System Password
for Installer
4–10 characters
Enter the system password for installer (®
13.1.3 Password Security).
Manager Extension
and Operator
Extension Number
Assign an extension as a manager extension (®
11.1.1
Manager Features) and an extension as a PBX
operator (® 12.1.5 Operator Features).
Flexible
Numbering
—Feature
1. Pattern 1
(with
)
2. Pattern 2
(without
)
Select whether or not the prefix " " must be entered
before dialing feature numbers.
[Example] Call Pickup feature number
Pattern 1 (with ): 41
Pattern 2 (without ): 41
Note that certain feature numbers (Line Access
numbers, Operator Call, etc.) never need this prefix.
For a list of the default flexible numbers, refer to the
[Flexible Numbering Table (available while a dial tone
is heard)] (® 6.1.4 Flexible Numbering/Fixed
Numbering
).
Flexible
Numbering
—Extension
KX-NCP500/
KX-NCP1000/
KX-TDE100/
KX-TDE200:
From 101/from 201
KX-TDE600:
From 1001/from 2001
Determines the number from which default extension
numbers begin.
Flexible
Numbering
—Operator
0/9 The feature number for Operator Call can be selected.
Flexible
Numbering—CO
Access
0/1/9 The feature number for Idle Line Access can be
selected.
DTMF/Pulse
Dialing
*1
Pulse/DTMF Determines whether DTMF or pulse dialing is used on
analog CO lines by default.
Document Version 2013-05 Feature Manual 299
14.1.2 Quick Setup