Panasonic KX-NCP1000 - Page 374

[Example of a) & b)]
CO Line Call
Operator
Extn. 102
VM Port 1 VM Port 2
VM Port X
VM Port 3
VM (DTMF)
Group
VPS (In AA service mode)
FWD, Intercept
PBX
Transfer
Sent "#6" + "102".
Switching to VM command
mailbox number
c. Voice Mail (VM) Transfer Button
By pressing the Voice
Mail (VM) Transfer button during a call, an extension user can transfer a call to
a mailbox of the VPS so that the caller can leave a message in the mailbox of the desired extension.
When the extension user presses this button and enters the desired extension number, the PBX will
transfer the call to the VM group and dial the mailbox number of the desired extension with the required
command (after the VPS answers the call). Therefore the caller can leave a message without knowing
the mailbox number.
6.5 [4-1-4] Wired Extension—Flexible Button
→
Type
→ Extension Number (for Voice Mail Transfer)
6.13 [4-2-3] Portable Station—Flexible Button
→ Type
→ Extension Number (for Voice Mail Transfer)
6.18 [4-3] DSS Console
→ Type
→ Extension Number (for Voice Mail Transfer)
[Performance of Pressing the
VM Transfer Button and Entering an Extension Number]
Transmitted Command
In AA Service Mode In VM Service Mode
Switching to VM command + Recording
message command (#6 +
H [H = Mailbox No.])
Recording message command (H [H =
Mailbox No.])
374 Feature Manual Document Version 2013-05
19.1.5 Voice Mail DTMF Integration