Panasonic KX-NS1000 - User Manual

Feature Guide
Pure IP-PBX
Model No. KX-NS1000
Thank you for purchasing this Panasonic product.
Please read this manual carefully before using this product and save this manual for future use.
In particular, be sure to read "1.1.1 For Your Safety (Page 16)" before using this product.
KX-NS1000: PCMPR Software File Version 002.10000 or later

Panasonic KX-NS1000 Specifications

General

Type	Hybrid IP-PBX
Max Concurrent Calls	256
VoIP Protocols	SIP, H.323
Power Supply	AC 100-240V, 50/60Hz
Maximum Extensions	1, 000
IP Extensions	1000
Operating Temperature	0°C to 40°C
Humidity	10 to 90% (non-condensing)
Max Users	1000

Summary

Introduction

About this Feature Guide

Describes the purpose and structure of the Feature Guide.

The Structure of this Manual

Outlines the main sections contained within the manual.

Section 1, For Your Safety

Provides details about safety precautions for preventing personal injury and/or damage to property.

Section 2, Call Handling Features

Provides details about the call handling features.

Section 3, Unified Messaging System

Details the Unified Messaging system, including administration and features.

Section 4, Network Features

Explains features related to network connectivity and protocols.

Section 5, System Configuration and Administration Features

Covers system configuration, extensions, and data control features.

Section 6, Appendix

Contains supplementary information such as system resources and revision history.

Index

Provides an alphabetical listing of topics and their corresponding page numbers.

List of Abbreviations

Section 1 For Your Safety

1.1 For Your Safety

Details safety precautions for preventing personal injury and/or property damage.

1.1.1 For Your Safety

Provides specific safety precautions and explains hazard symbols.

Section 2 Call Handling Features

2.1 Incoming Call Features

Covers features related to receiving incoming calls.

2.1.1 Incoming Trunk Call Features

Details how incoming calls via trunks are distributed to destinations.

2.1.1.2 Direct In Line (DIL)

Provides automatic direction of incoming trunk calls to preprogrammed destinations.

2.1.1.3 Direct Inward Dialling (DID);Direct Dialling In (DDI)

Provides automatic direction of incoming calls with DID/DDI numbers to preprogrammed destinations.

2.1.1.4 Multiple Subscriber Number (MSN) Ringing Service

Provides automatic direction of incoming ISDN-BRI line calls with an MSN to destinations.

2.1.1.5 Calling Line Identification (CLI) Distribution

Directs incoming calls to a CLI destination based on caller's identification number.

2.1.1.6 Intercept Routing

Provides automatic redirection of incoming trunk and intercom calls.

2.1.1.7 Intercept Routing-No Destination

Provides automatic redirection of incoming trunk calls without an assigned destination.

2.1.2 Internal Call Features

Details features for calls between extensions within the PBX.

2.1.2.1 Internal Call Features-SUMMARY

Lists the types of internal calls available, such as Intercom and Doorphone.

2.1.2.2 Internal Call Block

Restricts internal calls based on Class of Service (COS) destinations.

2.1.3 Incoming Call Indication Features

Describes methods used to indicate incoming calls.

2.1.3.1 Incoming Call Indication Features-SUMMARY

Summarizes various incoming call indication methods like Ring Tone, LED, and Display.

2.1.3.2 Ring Tone Pattern Selection

Allows selection of ring tone patterns for different incoming call types.

2.1.3.3 Call Waiting

Informs a busy extension that another incoming call is waiting.

2.2 Receiving Group Features

Details features related to receiving calls via groups.

2.2.1 Idle Extension Hunting

Redirects incoming calls to an idle member of a hunting group if the primary extension is busy/DND.

2.2.2 Incoming Call Distribution Group Features

Covers features for managing incoming calls distributed to a group of extensions.

2.2.2.1 Incoming Call Distribution Group Features-SUMMARY

Summarizes Incoming Call Distribution (ICD) groups and their management.

2.2.2.2 Group Call Distribution

Distributes incoming calls to member extensions using methods like UCD, Priority Hunting, or Ring.

2.2.2.4 Queuing Feature

Allows calls to wait in a queue when extensions in a group are busy.

2.2.2.5 VIP Call

Assigns priority to incoming call distribution groups for preferential call handling.

2.2.2.6 Overflow Feature

Redirects calls to a preprogrammed destination or sends a busy tone when queue capacity is exceeded.

2.2.2.7 Log-in;Log-out

Allows members to join (Log-in) or leave (Log-out) the group manually.

2.2.2.8 Supervisory Feature

Allows a supervisor extension to monitor and control member status within an ICD group.

2.3 Call Forwarding (FWD);Do Not Disturb (DND) Features

Covers features for forwarding or refusing calls when an extension user is unavailable.

2.3.1 Call Forwarding (FWD);Do Not Disturb (DND)-SUMMARY

Summarizes Call Forwarding (FWD) and Do Not Disturb (DND) features.

2.3.2 Call Forwarding (FWD)

Allows extensions and ICD groups to forward calls to preset destinations.

2.3.3 Do Not Disturb (DND)

Allows an extension user to set DND, preventing calls from arriving at the extension.

2.3.4 FWD;DND Button, Group FWD Button

Displays FWD/DND status and allows temporary setting or cancellation.

2.4 Answering Features

Describes methods an extension user can use to answer incoming calls.

2.4.1 Answering Features-SUMMARY

Summarizes answering methods like Line Preference and Hands-free Answerback.

2.4.2 Line Preference-Incoming

Allows PT users to select the method for answering incoming calls.

2.4.3 Call Pickup

Enables an extension user to answer a call ringing at any other extension.

2.4.4 Hands-free Answerback

Allows a PT user to talk to a caller without lifting the handset.

2.5 Making Call Features

Details features for making calls.

2.5.1 Predialling

Allows a display PT user to check and correct a number before dialling.

2.5.2 Automatic Extension Release

Releases an extension automatically if no digits are dialled within a programmed time.

2.5.3 Intercom Call

Allows an extension user to call another extension user.

2.5.4 Trunk Call Features

Covers features available when making a trunk call.

2.5.4.1 Trunk Call Features-SUMMARY

Summarizes features for trunk calls like Emergency Call and Account Code Entry.

2.5.4.2 Emergency Call

Allows dialing preprogrammed emergency numbers regardless of restrictions.

2.5.4.3 Account Code Entry

Allows entering an account code to identify outgoing calls for accounting purposes.

2.5.4.4 Dial Type Selection

Allows selection of dial mode (rotary or tone) for analogue trunks.

2.5.4.5 Reverse Circuit

Detects reverse signals from the telephone company for trunk call status.

2.5.4.6 Trunk Busy Out

Monitors loop current on analogue trunks to prevent seizing trunks with no loop current.

2.5.4.7 Pause Insertion

Inserts a preprogrammed pause time between digits of a dialled number.

2.5.4.8 Host PBX Access Code (Access Code to the Telephone Company from a Host PBX)

Allows a behind PBX to access the telephone company through a host PBX.

2.5.4.9 Special Carrier Access Code

Assigns a code for accessing multiple telephone companies for trunk calls.

2.5.5 Seizing a Line Features

Covers methods for selecting the line seized for making calls.

2.5.5.1 Seizing a Line Features-SUMMARY

Summarizes line seizing methods like Line Preference and Trunk Access.

2.5.5.2 Line Preference-Outgoing

Allows PT users to select the outgoing line they prefer when going off-hook.

2.5.5.3 Trunk Access

Describes methods used to access a trunk.

2.6 Memory Dialling Features

Details features for storing and dialling numbers quickly.

2.6.1 Memory Dialling Features-SUMMARY

Summarizes memory dialling features like One-touch Dialling and Speed Dialling.

2.6.2 One-touch Dialling

Allows accessing a person or feature by pressing a single button.

2.6.3 Last Number Redial

Automatically saves recently dialled numbers for easy redialing.

2.6.4 Speed Dialling-Personal;System

Allows making calls using abbreviated dialling for frequently used numbers.

2.6.5 Quick Dialling

Allows accessing an extension or feature by simply dialling a Quick Dialling number.

2.6.6 Hot Line

Sets an extension to automatically dial a preprogrammed number when going off-hook.

2.7 Toll Restriction (TRS);Call Barring (Barring) Features

Covers features to prohibit or restrict extension users from making certain trunk calls.

2.7.1 Toll Restriction (TRS);Call Barring (Barring)

Prohibits extension users from making certain trunk calls by COS programming.

2.7.2 Budget Management

Limits telephone usage to a preprogrammed budget on an extension basis.

2.7.3 Extension Dial Lock

Allows users to change TRS/Barring levels to prevent inappropriate trunk calls.

2.7.4 Dial Tone Transfer

Allows managers to temporarily change TRS/Barring levels for extension users.

2.7.5 Walking COS

Allows users to use their COS at another extension, overriding the other extension's COS.

2.7.6 Verification Code Entry

Identifies calls for accounting/billing or changes TRS/Barring level using a verification code.

2.8 Automatic Route Selection (ARS) Features

Details how ARS automatically selects carriers for outgoing trunk calls.

2.8.1 Automatic Route Selection (ARS)

Automatically selects the carrier available at the time of an outgoing trunk call.

2.9 Primary Directory Number (PDN);Secondary Directory Number (SDN) Features

Provides features for PDN and SDN buttons, ideal for boss-secretary communication.

2.9.1 Primary Directory Number (PDN);Secondary Directory Number (SDN) Extension

Details PDN and SDN buttons for boss-secretary communication.

2.10 Busy Line;Busy Party Features

Covers features for handling calls when extensions or lines are busy.

2.10.1 Automatic Callback Busy (Camp-on)

Monitors a busy destination/trunk and sends a callback ringing when available.

2.10.2 Executive Busy Override

Allows an extension user to interrupt an existing call to establish a three-party conference.

2.10.3 Call Monitor

Allows an extension user to listen to a busy extension user's existing conversation.

2.10.4 Second Call Notification to Busy Extension

Notifies a busy extension of a second incoming call.

2.10.4.1 Second Call Notification to Busy Extension-SUMMARY

Summarizes Call Waiting, OHCA, and Whisper OHCA notifications.

2.10.4.2 Call Waiting Tone

Sends a Call Waiting tone to a called extension to indicate another call is waiting.

2.10.4.3 Off-hook Call Announcement (OHCA)

Allows talking with a busy extension via speaker/microphone without lifting handset.

2.10.4.4 Whisper OHCA

Sends a spoken message to a busy extension heard only by the called user.

2.11 Conversation Features

Details features related to conversations.

2.11.1 Hands-free Operation

Allows a PT user to talk without lifting the handset.

2.11.2 Off-hook Monitor

Allows others to listen to a conversation through the built-in speaker.

2.11.3 Mute

Allows disabling the speaker or handset microphone for private consultation.

2.11.4 Headset Operation

Allows the use of headset-compatible PTs for talking without lifting the handset.

2.11.5 Data Line Security

Protects communications from interruptions by signals like Call Waiting.

2.11.6 Flash;Recall;Terminate

Features for disconnecting a call and originating another without hanging up.

2.11.7 External Feature Access (EFA)

Allows users to access features outside the PBX using telephone company services.

2.11.8 Trunk Call Limitation

Limits trunk call duration by system timer.

2.11.9 Calling Party Control (CPC) Signal Detection

Detects CPC signal from analogue trunks to monitor status and disconnect lines.

2.12 Transferring Features

Covers features for transferring calls.

2.12.1 Call Transfer

Allows an extension user to transfer a call to another extension or an outside party.

2.13 Holding Features

Details features for placing calls on hold.

2.13.1 Call Hold

Allows an extension user to put a call on hold.

2.13.2 Call Park

Allows placing a call into a common parking zone for later retrieval.

2.13.3 Call Splitting

Allows calling another extension while putting the original party on Consultation Hold.

2.13.4 Music on Hold

Plays music to a party that has been put on hold.

2.14 Conference Features

Details features for establishing conference calls.

2.14.1 Conference Features-SUMMARY

Summarizes features for establishing conference calls.

2.14.2 Conference

Allows adding additional parties to an existing two-party conversation.

2.14.3 Privacy Release

Allows suspending Automatic Privacy to join a three-party call.

2.15 Conference Group Call Features

Covers features for group conference calling.

2.15.1 Conference Group Call

Allows calling a pre-determined group simultaneously for conference calls.

2.16 Direct Inward System Access (DISA) Features

Details features for accessing PBX functions via an SLT extension.

2.16.1 Direct Inward System Access (DISA)

Allows outside callers to access specific PBX features like intercom calls or outside calls.

2.16.2 Automatic Fax Transfer

Automatically transfers fax calls arriving on DISA lines to preprogrammed destinations.

2.17 Paging Features

Covers features for making voice announcements.

2.17.1 Paging

Allows an extension user to make a voice announcement to multiple destinations.

2.17.2 Trunk Answer From Any Station (TAFAS)

Allows any extension user to answer a call received at the floating extension number.

2.18 External Device Features

Details features for connecting and controlling external devices.

2.18.1 Doorphone Call

Allows connecting doorphones to the PBX for visitor communication.

2.18.2 Door Open

Allows an extension user to unlock a door for a visitor using their telephone.

2.18.3 External Sensor

Connects external sensing devices to the PBX for alerting.

2.18.4 External Relay Control

Allows the PBX to control external devices like alarms via relays.

2.19 Caller ID Features

Covers features for receiving and displaying caller information.

2.19.1 Caller ID

Receives caller information such as name and number through the trunk.

2.19.2 Incoming Call Log

Automatically records caller information in the call log of the called extension.

2.20 Message Features

Details features related to messages.

2.20.1 Message Waiting

Notifies subscribers of new messages via telephone lamps or displays.

2.20.2 Absent Message

Allows users to set or select a message to be displayed on their telephone.

2.21 Proprietary Telephone (PT) Hardware Features

Describes the hardware features of PTs.

2.21.1 Fixed Buttons

Details the usage of fixed buttons on PTs, DSS Consoles, and Add-on Key Modules.

2.21.2 Flexible Buttons

Explains how flexible and programmable feature (PF) buttons can be customized.

2.21.3 LED Indication

Describes how LEDs on buttons show line conditions with various light patterns.

2.21.4 Display Information

Details the information displayed to the user during calls.

2.22 Administrative Information Features

Covers features for administrative tasks and information logging.

2.22.1 Record Log Features

Details features for recording call information.

2.22.1.1 Station Message Detail Recording (SMDR)

Automatically records detailed information for each extension.

2.22.1.2 Syslog Record Management

Outputs local alarm information to an external PC via a Syslog server.

2.22.2 Printing Message

Allows selecting messages to be output on SMDR.

2.22.3 Call Charge Services

Provides call charge information and services.

2.23 Hospitality Features

Covers features supporting hotel-type environments.

2.23.1 Hospitality Features-SUMMARY

Summarizes features for hotel environments like Room Status and Call Billing.

2.23.2 Room Status Control

Allows hotel operators to view and set room check-in/check-out/cleaned status.

2.23.3 Call Billing for Guest Room

Outputs call records with charges for guest billing.

2.24 Extension Controlling Features

Details features for controlling extension behavior and access.

2.24.1 Extension Personal Identification Number (PIN)

Allows users to set features or access their telephone remotely using a PIN.

2.24.2 Extension Feature Clear

Allows users to clear multiple features set on their telephone at once.

2.24.3 Walking Extension Features

Covers features for using extension settings at different locations.

2.24.3.1 Walking Extension

Allows using any extension with your settings available, known as Walking Station.

2.24.4 Timed Reminder

Allows setting a reminder or wake-up call at a certain time.

2.25 Audible Tone Features

Details distinctive dial tones that inform extensions about activated features.

2.25.1 Dial Tone

Describes distinctive dial tones informing extensions about activated features.

2.25.2 Confirmation Tone

Confirms feature operation success by sending a tone to extension users.

2.26 Computer Telephony Integration (CTI) Features

Covers CTI interface features for advanced call handling.

2.26.1 Computer Telephony Integration (CTI)

Allows extension users to make/receive calls with advanced features via LAN.

2.26.2 CA (Communication Assistant)

Details the CA CTI application and its operating modes.

2.27 Cellular Phone Features

Provides features for using cellular phones and other outside destinations with the PBX.

2.27.1 Cellular Phone Features-SUMMARY

Summarizes features for cellular phones and other outside destinations.

2.28 Miscellaneous Features

Covers various miscellaneous features.

2.28.1 Background Music (BGM)

Allows PT users to listen to BGM through the built-in speaker.

2.28.2 Outgoing Message (OGM)

Allows manager extensions to record outgoing messages for various features.

Section 3 Unified Messaging System

3.1 Unified Messaging System Administration

Covers administration of the Unified Messaging system.

3.1.1 Unified Messaging System Overview

Provides an overview of the Unified Messaging system's features and users.

3.1.2 System Administration

Details system administration tasks for the Unified Messaging system.

3.1.2.4 Password Administration

Allows clearing subscriber passwords for new assignments.

3.1.2.5 System Backup;Restore

Allows backing up or restoring system data as individual files.

3.1.2.6 System Reports

Provides system reports for monitoring operating status.

3.1.2.7 System Security

Protects the Unified Messaging system from unauthorized programming or use.

3.1.3 Fax Server

Details the PBX's ability to receive, distribute, and send faxes.

3.2 System and Subscriber Features

Covers system features and subscriber-specific mailbox customizations.

3.2.1 System Features

Details system-level features within the Unified Messaging system.

3.2.1.15 Custom Service

Allows callers to perform specific functions by pressing dial buttons.

3.2.2 Subscriber Features

Details features that subscribers can use to customize their mailboxes.

3.2.2.1 Auto Receipt

Allows subscribers to receive a message confirming reception of sent messages.

3.2.2.2 Automatic Fax Delivery

Automatically forwards received faxes to a specified fax machine.

3.2.2.3 Automatic Login

Allows subscribers/managers to log in to mailboxes directly without entering mailbox number.

3.2.2.4 Autoplay New Message

Plays new messages automatically when a subscriber logs into their mailbox.

3.2.2.5 Bookmark

Enables setting a bookmark per message while pausing a message.

3.2.2.6 Call-through Service

Allows subscribers to make outside calls via the subscriber service menu.

3.2.2.7 Call Transfer Scenario

Creates a call handling scenario by combining Call Transfer and Incomplete Call Handling.

3.2.2.8 Call Transfer Status

Allows subscribers to specify how the UM system handles calls to their extensions.

3.2.2.9 Callback Number Entry

Enables callers to leave a callback number in various ways.

3.2.2.10 Caller ID Callback

Enables subscribers to call back a message sender using the Caller ID number.

3.2.2.11 Delete Message Confirmation

Requests confirmation from subscriber before erasing a message.

3.2.2.12 Direct Service Access

Allows subscribers to access features directly by dialling a UM extension number.

3.2.2.13 External Message Delivery Service

Allows subscribers to send messages to multiple parties at a specified time.

3.2.2.14 Fax Cover Page

Adds a cover page to a fax before it is sent.

3.2.2.15 Fax Driver

Allows subscribers to send faxes from their computer using the standard print function.

3.2.2.16 Forwarding to a Mailbox

Forwards calls to the floating extension number of the UM group to the extension's mailbox.

3.2.2.17 Group Distribution Lists

Allows sending messages to multiple mailboxes simultaneously.

3.2.2.18 Incomplete Call Handling Service

Offers callers service options when the extension is busy or no answer.

3.2.2.19 Live Call Screening (LCS)

Allows subscribers to monitor incoming calls as messages are being recorded.

3.2.2.20 Mailbox

A place where all messages left for a subscriber are stored.

3.2.2.21 Mailbox Capacity Warning

Alerts subscribers when recording time for mailboxes is running low.

3.2.2.22 Manager Service Switching

Allows subscribers to access System Manager's and Message Manager's mailboxes.

3.2.2.23 Message Transfer

Allows subscribers to transfer messages to other mailboxes after listening.

3.2.2.24 Personal Custom Service

Allows subscribers to use Custom Services in their Personal Greeting.

3.2.2.25 Personal Greetings

Describes greetings heard when a caller reaches a subscriber's mailbox.

3.2.2.26 Private Message

Allows subscribers/managers to mark messages as 'Private'.

3.2.2.27 Recover Message

Enables subscribers to recover deleted messages.

3.2.2.28 Remote Absent Message

Allows subscribers to change their absent message from a remote location.

3.2.2.29 Remote Call Forwarding Set

Allows subscribers/managers to program extensions from remote locations.

3.2.2.30 Send to Fax Machine

Allows subscribers to send received faxes to another destination.

3.2.2.31 Subscriber Tutorial

Provides voice guidance for first-time mailbox login and configuration.

3.2.2.32 Timed Reminder Setting

Allows subscribers to set a Timed Reminder by following system prompts.

3.2.2.33 Toll Saver

Allows checking mailboxes without incurring telephone charges.

3.2.2.34 Two-way Record;Two-way Transfer

Provides features for recording conversations for subscribers.

3.2.2.35 Urgent Message

Allows specifying a message as 'Urgent' for priority playback.

3.2.2.36 Voice Mail (VM) Transfer Button

Allows subscribers to transfer calls to mailboxes by pressing the VM Transfer button.

3.2.2.37 Web Programming

Allows subscribers to access and change various settings via Web Maintenance Console.

Section 4 Network Features

4.1 Public Network Features

Covers features related to public network connections.

4.1.1 SIP (Session Initiation Protocol) Trunk

Connects to Internet telephony services provided by an ITSP using SIP.

4.1.2 Integrated Services Digital Network (ISDN) Service Features

Details ISDN features for voice, data, and image transmission.

4.1.2.1 Integrated Services Digital Network (ISDN)-SUMMARY

Summarizes ISDN interface types and supplementary services.

4.1.2.2 Calling;Connected Line Identification Presentation (CLIP;COLP) and Calling;Connected Name Identification Presentation (CNIP;CONP)-by QSIG

Sends caller/answered party number/name to QSIG network.

4.1.2.3 Advice of Charge (AOC)

Receives call charge information on ISDN lines from the telephone company.

4.1.2.4 Call Forwarding (CF)-by ISDN (P-MP)

Forwards incoming ISDN calls to another outside party via telephone company.

4.1.2.5 Call Forwarding (CF)-by ISDN (P-P)

Forwards incoming ISDN calls directly to the network destination.

4.1.2.6 Call Hold (HOLD)-by ISDN

Puts an ISDN call on hold using the ISDN service of the telephone company.

4.1.2.7 Call Transfer (CT)-by ISDN

Transfers an ISDN call to an outside party using ISDN service.

4.1.2.8 Three-party Conference (3 PTY)-by ISDN

Establishes a three-party conference call using ISDN service.

4.1.2.9 Malicious Call Identification (MCID)

Allows tracing a malicious caller during a call or after hang-up.

4.1.2.10 Completion of Calls to Busy Subscriber (CCBS)

Receives callback ringing when a called party becomes free.

4.1.2.11 ISDN Service Access by Keypad Protocol

Provides supplementary services via key protocol, possibly requiring a service access code.

4.2 One-look Networking

Details connecting and managing multiple PBXs over a private IP network.

4.2.1 One-look Networking Overview

Provides an overview of One-look networking, including Master/Slave units.

4.2.2 Network Type Comparison

Compares One-look networking with H.323 QSIG networking.

4.2.3 One-look Networking Survivability

Covers features ensuring network operation during failures.

4.2.3.1 Backup Master Mode and Isolated Mode

Details modes for maintaining operation when the Master unit fails.

4.2.3.2 Automatic Rerouting to Secondary PBX

Allows IP extensions to automatically reconnect to a secondary PBX if the primary fails.

4.2.3.3 UM Group Failover

Redirects calls to another PBX's UM group if the primary UM group is unavailable.

4.3 Private Network Features

Covers features for establishing private networks.

4.3.1 TIE Line Service

Provides cost-effective communications between PBXs at different locations via leased lines.

4.3.1.1 Making a TIE Line Call

Describes two methods for making a TIE line call.

4.3.1.2 TIE Line and Trunk Connection

Details patterns for connecting TIE lines with trunks.

4.3.1.3 FWD;Call Transfer;Intercept Routing to the TIE Line

Explains how to route calls to the TIE line.

4.3.1.3 TIE Line Programming

Details the system programming for TIE line calls.

4.3.1.3 Trunk Call through Other PBXs-by the ARS feature

Describes trunk calls through other PBXs using the ARS feature.

4.3.1.3 Blocking trunk calls made through another PBX and how to override it

Explains how to block and override trunk calls through another PBX.

4.3.1.3 TIE Line Programming

Provides programming examples for PBX-2.

4.3.1.3 TIE Line Programming

Provides programming examples for PBX-1 and PBX-2.

4.3.1.3 TIE Line Programming

Provides programming examples for PBX-1 and PBX-2 with SMDR output.

4.3.1.3 FWD;Call Transfer;Intercept Routing to the Trunk

Shows an example of call routing to the trunk via TIE line.

4.3.1.3 Trunk-to-TIE-to-Trunk Access

Connects an outside caller to an outside party through TIE line using DISA feature.

4.3.1.3 TIE Line Programming

Details TIE Line Routing and Modification Table for programming.

4.3.1.3 TIE Line Programming

Provides programming examples for PBX-1's TIE Line Routing.

4.3.1.3 TIE Line Programming

Provides programming examples for PBX-1's TIE Line Routing.

4.3.1.3 TIE Line Programming

Illustrates receiving a call through a TIE line using Extension Number Method.

4.3.1.3 TIE Line Programming

Illustrates receiving a call through a TIE line using PBX Code Method.

4.3.1.3 TIE Line Routing Flowchart

Flowchart for making a TIE Line call from an extension.

4.3.1.3 TIE Line Programming

Illustrates receiving a call through a TIE Line.

4.3.1.3 TIE Line Programming

Provides PC Programming Manual References for TIE Line Service.

4.3.3 ISDN Virtual Private Network (ISDN-VPN)

Describes ISDN VPN service using existing lines for private network communication.

4.3.3.1 ISDN Virtual Private Network (ISDN-VPN)

Details ISDN VPN service usage and public/private discrimination.

4.3.4 QSIG Standard Features

Covers standard QSIG protocol features for PBX communication.

4.3.4.1 QSIG Standard Features-SUMMARY

Summarizes standard QSIG features like CLIP, COLP, CLIR, COLR.

4.3.4.2 Calling;Connected Line Identification Presentation (CLIP;COLP) and Calling;Connected Name Identification Presentation (CNIP;CONP)-by QSIG

Sends caller/answered party number/name to QSIG network.

4.3.4.3 Call Forwarding (CF)-by QSIG

Forwards a call to the QSIG network.

4.3.4.4 Call Transfer (CT)-by QSIG

Transfers a call to the QSIG network.

4.3.4.5 Completion of Calls to Busy Subscriber (CCBS)-by QSIG

Receives callback ringing when a busy called party on QSIG network becomes free.

4.3.5 QSIG Enhanced Features

Details enhanced features for PBXs networked via ISDN or V-IPGW cards.

4.3.5.1 Network Direct Station Selection (NDSS)

Assigns flexible buttons to monitor extension status on other PBXs.

4.3.5.1 Network Direct Station Selection (NDSS)

Details NDSS button functions and network PBX ID assignment.

4.3.5.1 Network Direct Station Selection (NDSS)

Explains NDSS feature conditions and programming.

4.3.5.2 Centralised Voice Mail

Allows multiple PBXs to share Unified Messaging services.

4.3.6 Network ICD Group

Covers features for ICD groups across multiple PBXs in a private network.

4.3.6.1 PS Roaming by Network ICD Group

Allows PS registration across multiple PBXs for simultaneous calls.

Section 5 System Configuration and Administration Features

5.1 System Configuration-System

Covers system-wide configuration settings.

5.1.1 Class of Service (COS)

Controls behavior and privileges of extension users by assigning a COS.

5.1.2 Group

Details various group types like Trunk, Extension User, Call Pickup, and Paging.

5.1.3 Tenant Service

Allows sharing the PBX with a certain number of tenants.

5.1.4 Time Service

Supports day, night, lunch, and break modes for call routing.

5.1.5 Operator Features

Details features for assigning and managing operators.

5.1.6 Manager Features

Covers features accessible to extensions assigned as managers.

5.2 System Configuration-Extensions

Covers configuration for different types of extensions.

5.2.1 IP Proprietary Telephone (IP-PT)

Details IP telephones that connect to the PBX over a LAN.

5.2.2 SIP (Session Initiation Protocol) Extension

Supports SIP-compatible IP telephones for making and receiving calls.

5.2.2.1 KX-UT Series SIP Phones

Describes features available on KX-UT series SIP phones.

5.2.2.2 SIP Portable Station (S-PS) and SIP Cell Station (SIP-CS)

Explains features available to SIP-CSs and S-PSs.

5.2.2.3 Simple Remote Connection

Supports simple remote connectivity for SIP phones via SBC.

5.2.3 Peer-to-Peer (P2 P) Connection

Establishes direct communication between compatible IP extensions.

5.2.4 Portable Station (PS) Features

Covers features for Portable Stations (PS).

5.2.4.1 Portable Station (PS) Connection

Describes connecting PSs and using PBX features with PSs.

5.2.4.2 PS Ring Group

Defines a group of PS extensions that receive incoming calls.

5.2.4.3 PS Directory

Allows PS users to store and dial numbers from directories.

5.2.4.4 PS Feature Buttons

Describes customizing flexible buttons on PSs for PBX features.

5.2.4.5 Wireless XDP Parallel Mode

Allows using a PS in parallel with a wired telephone.

5.2.4.6 Virtual PS

Assigns an extension number to a portable station without registering the PS unit itself.

5.2.5 ISDN Extension Features

Covers features for ISDN extensions.

5.2.5.1 ISDN Extension

Details how ISDN ports can be used for trunk or extension connection.

5.3 Legacy Device Connection

Covers connecting legacy devices not natively compatible with KX-NS1000.

5.3.1 Stacking Connection

Details connecting PBXs via a stacking connection to act as a legacy gateway.

5.3.2 Trunk Adaptor Connection

Connects IP trunks to Trunk Adaptors for E1/PRI line connections.

5.4 E-mail Notification Features

Covers features for notifying users via e-mail about events.

5.4.1 E-mail Notification for Extension Users

Notifies extension users via e-mail about events like new messages or missed calls.

5.4.2 E-mail Notification of System-level Events

Sends e-mails to administrators about system-level events like alarms or software updates.

5.5 System Data Control

Covers management of user information and system data.

5.5.1 User Profiles

Manages user information settings on a per-user level.

5.5.2 PC Programming

Details the three levels of authorization for programming the PBX.

5.5.3 PT Programming

Allows PT users to perform personal or manager programming.

5.5.4 DSP Resource Usage

Explains DSP resource requirements for PBX operations.

5.5.4.1 DSP Resource Reservation

Allows reserving DSP resources for specific features to guarantee minimum performance.

5.5.4.2 DSP Resource Advisor

Provides a tool to calculate required DSP resources based on operating conditions.

5.5.5 Automatic Setup

Features for automatic ISDN configuration and time adjustment.

5.5.6 Dynamic Host Configuration Protocol (DHCP) Server

Provides automatic IP address assignment to network devices.

5.5.7 Flexible Numbering;Fixed Numbering

Details numbering plans for dialing extensions and accessing PBX features.

5.5.8 Floating Extension

Allows assigning virtual extension numbers to resources.

5.5.9 Software Upgrading

Procedures for updating PBX software and connected device software.

5.6 Fault Recovery;Diagnostics

Covers features for fault recovery and system diagnostics.

5.6.1 UPS (Uninterruptible Power Supply) Integration

Details integrating UPS for power failure protection.

5.6.2 Power Failure Transfer

Automatically connects specific SLTs to trunks during power failure.

5.6.3 Power Failure Restart

Describes how the PBX restarts stored data after power restoration.

5.6.4 Local Alarm Information

Provides information on PBX errors and alarm status.

5.6.5 Simple Network Management Protocol (SNMP) System Monitor

Allows managing PBX status information using SNMP.

5.6.6 Dynamic Host Configuration Protocol (DHCP) Assignment

Assigns the PBX as a DHCP client for automatic IP address assignment.

5.6.7 PING Confirmation

Confirms connection of IP telephones, routers, and hubs using PING.

Section 6 Appendix

6.1 Capacity of System Resources

Lists the capacity limits for various PBX features and resources.

6.2 Tones;Ring Tones

Details the default tone patterns for various call indications.

6.2.1 Tones;Ring Tones

Illustrates default tone patterns for confirmation, dial, busy, and ringback tones.

6.3 Features that Require Activation Keys

Lists features that require specific activation keys.

6.4 Supported Management Information Base (MIB) Table

Provides a table of supported MIB objects for SNMP management.

6.5 Revision History

Lists software file versions and changes made.

6.5.1 PCMPR Software File Version 002.0 xxxx

Details new and changed contents for software file version 002.0xxxx.

6.5.2 PCMPR Software File Version 002.1 xxxx

Lists new and changed contents for software file version 002.1xxxx.