3. Set passwords for the SIP extensions.
a. Click the
cell in the Connection column for each SIP
extension you wish to register. The Command
Connection screen appears.
b. Click OUS.
c. Enter a password in the Password cell for each SIP
extension.
d. Click Apply.
e. Click the cell in the Connection column for each SIP
extension to which a password has been assigned.
The Command Connection screen appears.
f. Click INS.
g. Click OK.
Note
• Alternatively, it is possible to set an extension
number as a password for each SIP extension
automatically.
• In order to set the password automatically, do
the following in substitution for step c of the
procedure above.
a. Click Copy to. A screen will appear with
information on
assigned extension numbers
for SIP extensions.
b. Click Select All.
c. Click Execute to copy each Extension
Number to Password.
d. Click Yes.
e. Click OK to return to the Port Property
screen.
• When copying extension numbers to
passwords, you can also use the
icon on the
bottom left of the Virtual SIP Extension Port
Property screen.
Installation Manual 255
5.8.1 Registering IP Telephones
To Next Page
Loading...
