Panasonic KX-TD816E - Page 361

6-6 DSS Console Features
6.2 DSS Console Features
One-Touch Dialling Assignment
You can assign a DSS or PF button as an One-Touch Dialling button. The number can be
an extension number or a telephone number. Up to sixteen digits can be stored into each
memory location.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
1. Press the desired DSS or PF button on the console.
2. Dial 2 on the paired telephone.
3. Enter the desired number on the paired telephone.
• When you assign an outside phone number, you must dial
the line access code first.
4. Press the STORE button on the paired telephone.
• Repeat steps 1 through 4, to program numbers on other DSS
or PF buttons.
— To exit from the Station Programming mode: Press [PROGRAM] or lift the handset.
One-Touch Access Assignment for System Features
You can assign the desired feature number to a DSS or PF button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
1. Press the desired DSS or PF button on the console.
2. Dial 2 on the paired telephone.
3. Enter the desired feature number on the paired telephone.
<Example>
If you wish to gain access to the “Paging — All” feature, enter
feature number, 62 .
2
2
AUTO DIAL
STORE
4
3
desired number
1
or
2
2
3
feature number
1
or