Panasonic KX-TD816E - Page 362

DSS Console Features 6-7
6.2 DSS Console Features
4. Press the STORE button on the paired telephone.
• Repeat steps 1 through 4, to program numbers on other DSS
or PF buttons.
— To exit from the Station Programming mode: Press [PROGRAM] or lift the handset.
■ To correct an error while programming
1. Press the CLR button (S2) or the TRANSFER (CLEAR)
button on the paired telephone and complete programming.
(The TRANSFER button becomes the CLEAR button when using the
overlay.)
■ To erase after programming
1. Press the DSS or PF button you wish to erase on the console.
2. Press 2 on the paired telephone.
3. Press the STORE button on the paired telephone.
• The number is erased.
AUTO DIAL
STORE
4
S 1
S 2
S 3
CLR
TRANSFER
1
1
or
2
2
AUTO DIAL
STORE
3
or