Panasonic KX-TD816E - Page 464

Quick Reference 8-7
8 Quick Reference
❐ Ringing Tone Selection for
Intercom Calls
•Enter the programming mode.
•Press the INTERCOM button.
•Press the same INTERCOM button again.
•Dial the tone type number (1 through 8).
•Press the STORE button.
•Exit the programming mode.
❐ Self-Extension Number
Confirmation
•Enter the programming mode.
•Dial 6.
•Press HOLD (END) button.
•Exit the programming mode.
❐ Station Programming Data Default
Set
•Enter the programming mode.
•Dial #.
•Press STORE button.
•Exit the programming mode.
❐ Station Speed Dialling Number /
Name Assignment
(KX-T7235/KX-
T7431/KX-T7433/KX-T7436 only)
- When using a KX-T7235 or KX-T7436;
— To store a number
•Enter the programming mode.
•Press a Function button (F1 through F10).
•Dial the desired number.
•Press STORE button.
•Exit the programming mode.
— To store a name
•Enter the programming mode.
•Press a Function button (F1 through F10).
•Press NEXT (S3) button.
•Enter the name.
—
See the Combination Tables for
information on how to enter each character.
• Press STORE button.
•Exit the programming mode.
- When using a KX-T7431 or KX-T7433;
— To store a number
•Enter the programming mode.
•Press .
•Enter the station speed dial number (0
through 9).
•Enter the desired number.
•Press STORE button.
•Exit the programming mode.
— To store a name
•Enter the programming mode.
•Press .
•Enter the station speed dial number (0
through 9).
•Press NEXT (S3) button or MODE button.
•Enter the name.
—
See the Combination Tables for
information on how to enter each character.
• Press STORE button.
•Exit the programming mode.