Panasonic KX-TDA600

1. Install 4 anchor plugs in the wall, using the metal bracket as a template. Fix the metal bracket with 4 screws
(A).
30 mm
8 mm
Anchor Plug
Metal Bracket
Wall
Screw (A)
Hammer
Anchor Plug
Screw (A)
Metal Bracket
Drive the
screw
to this point.
2. Hook the shelf onto the metal bracket, making sure that the shelf slides down and onto the hooked parts
of the metal bracket. Use 2 screws (B) to fix both sides of the shelf.
TOP
Screw (B)
100 Installation Manual
2.2.8 Wall Mounting (KX-TDA600/KX-TDA620)