Panasonic KX-TDA600

2.12.4 Before Site Survey
Use the KX-TD7685/KX-TD7695 PS to conduct the site survey.
Note
Display prompts for the site survey are only available in English.
Checking the CS ID Number
Check
the CS
ID number label attached to the CS. If the CS ID number label is not attached to the CS, check
the CS ID number using the Maintenance Console. For details, refer to "2.6.15 Utility—PS Information" in the
PC Programming Manual.
Assigning the CS ID Number to the PS
Using the KX-TD7685/KX-TD7695
Press 1, 9, and POWER
for more than 2 seconds.
0 to 7 0 to 9 and A to F
CS No. CS ID No.
1
9
9
2
ABC
To enter letters
A: + C: + E: +
B: + D: + F: +
To the initial display
To the Desired CS No.
3
DEF
4
GHI
0
1
5
JKL
2
ABC
Note
To clear the CS ID number assigned to the PS, follow the procedure below:
Press 1, 9, and POWER
for more than 2 seconds.
0 to 7
CS No.
1
9
9
3
DEF
To the Desired CS No.
OR
#
To clear one by one
To clear all at once
To the initial display
Setting and Installing the CS Temporarily for Site Survey
1. Switch the Radio Signal Test switch from OFF to ON.
2. Set the channel number switches as desired.
3. Set the Power Supply Select switch as desired.
272 Installation Manual
2.12.4 Before Site Survey