Panasonic KX-TDA600

2.8.8 CTI-LINK Card (KX-TDA0410)
Function
Ethernet card for
CTI communication via 10BASE-T port. CSTA Phase 3 protocol compatible. To be installed
in the Basic Shelf only.
LEDs
RJ45 (10BASE-T)
To LAN/
CTI Server
Accessories and User-supplied Items
Accessories (included): none
User-supplied (not included): RJ45 connector
Note
• The maximum length of the cable to be connected to this optional service card is 100 m.
• This optional service card can be connected to PCs on a LAN via a CTI server to provide third party
call control CTI.
The operating system of the PC or CTI server required for third party call control depends on your CTI
application software. For details, refer to the manual for your CTI application software.
• Portions of this product contains software of Datalight, Inc. Copyright 1993–2000 Datalight,Inc., All
Rights Reserved.
Pin Assignments
RJ45 Connector (10BASE-T)
No. Signal Name Input (I)/Output (O) Function
8
1
1 TPO+ O Transmit data+
2 TPO- O Transmit data-
3 TPI+ I Receive data+
4-5 Reserved – –
6 TPI- I Receive data-
7-8 Reserved – –
190 Installation Manual
2.8.8 CTI-LINK Card (KX-TDA0410)