Panasonic KX-TDA600

3.3 Installation of the Maintenance Console
3.3.1 Installing and Starting the Maintenance Console
System Requirements
Required Operating System
• Microsoft
®
Windows
®
XP or Windows Vista
®
Business
Minimum Hardware Requirements
• CPU: 800 MHz Intel
®
Celeron
®
microprocessor
• HDD: 100 MB of available hard disk space
• RAM: 128 MB of available RAM
Recommended Display Settings
• Screen resolution: XGA (1024 ´ 768)
• DPI setting: Normal size (96 DPI)
Password Security
CAUTION
To the Administrator or Installer regarding the system password
1. Please provide all system passwords to the customer.
2. To avoid unauthorised
access and possible abuse of the PBX, keep the passwords secret, and inform
the customer of the importance of the passwords, and the possible dangers if they become known to
others.
3. The PBX has default passwords preset. For security, change these passwords the first time that you
programme the PBX.
4. Change the passwords periodically.
5. It is strongly recommended that passwords of 10 numbers or characters be used for maximum
protection against unauthorised access. For a list of numbers and characters that can be used in system
passwords, refer to "1.1.2 Entering Characters" in the PC Programming Manual.
Installing the Maintenance Console
Note
• Make sure to install and use the latest version of the Maintenance Console.
• To install or uninstall the software on a PC running Windows XP Professional, you must be logged in
as a user in either the "Administrators" or "Power Users" group.
• To install or uninstall the software on a PC running Windows Vista Business, you must be logged in
as a user in the "Administrators" group.
• To connect the PC to the PBX via USB, the KX-TDA USB driver must be installed. Follow the
instructions of
the wizard to install the KX-TDA USB driver. When the PBX is first connected to the PC
via USB, you may be asked to select the appropriate USB driver. Browse for and select the KX-TDA
USB driver that was installed previously.
312 Installation Manual
3.3.1 Installing and Starting the Maintenance Console