Notice
• Use only the SD Memory Card included with the PBX, or a Panasonic optional upgrade SD Memory
Card.
• The SD
Memory Card must be inserted in the SD Memory Card slot of the EMPR card before startup.
Note
• For details about connecting peripherals, refer to "2.14.1 Connection of Peripherals".
• For details about System Initialise Switch, refer to "2.16.1 Starting the PBX".
• For details about Reset Button, refer to "4.1.4 Using the Reset Button".
• Portions of this product contains software of Datalight, Inc. Copyright 1993–2000 Datalight,Inc., All
Rights Reserved.
LED Indications
Indication
Colour Description
BATT ALARM Red Battery alarm indication
• OFF: Normal
ON: Alarm
SD ACCESS Green SD memory card status
• ON: Accessing
Installation Manual 127
2.3.1 EMPR Card
To Next Page
Loading...
