Panasonic KX-TDA600 - Page 255

PS Registration
[690]
PS No.*
1 to 4 digits
END
(HOLD)
ENTER ENTER
To the PS
operation
below
Extn. No.
* Without an EMEC card installed: 001 to 256.
With an EMEC card installed: 001 to 512.
When the PS has not been registered yet
When registering the
PS for the first time, it is possible to select the desired language for the display. (You do
not need to enter the PS system programming mode when registering for the first time.)
Using the KX-TD7684/KX-TD7694
Press
POWER for
2 seconds.
Select the desired
language .
Press "F"
for 2
seconds.
C.Tone C.Tone
Using the KX-TD7680
Press
POWER for
2 seconds.
Press S3
for 2
seconds.
C.Tone
Press S2 repeatedly
to select the desired
language.
[ F2 ]
[ F3 ]
Using the KX-TD7690
Press
POWER for
2 seconds.
Press S3
for 2
seconds.
C.Tone
Press S2 repeatedly
to select the desired
language.
F2
F3
When the PS has already been registered to another PBX
One PS can be registered to a maximum of 4 different PBXs.
Using the KX-TD7684/KX-TD7694
Choose
"Base 1–4".
Select
"
Register H/S ".
C.Tone
Using the KX-TD7680
Choose
"SYSTEM 1–4".
Select
"REGISTRATION".
C.Tone
Installation Manual 255
2.11.7 Connecting a Cell Station to the PBX