Panasonic KX-TDA600

Installing the Basic Shelf
For the basic system, install the metal bracket (supplied with the Basic Shelf) on the floor first. Then, attach
the Basic Shelf to the metal bracket.
1. Install 4 anchor plugs on the floor, using the metal bracket as a template. Fix the metal bracket in place
with 4 screws (A).
TOP
30 mm
8 mm
Floor
Screw (A) Metal Bracket
Anchor
Plug
Anchor
Plug
Hammer
Metal
Bracket
Screw (A)
2. Lift the Basic Shelf, attach it to the metal bracket, and slide it backwards until it locks.
FRONT
TOP
1
2
Metal Bracket
Installation Manual 53
2.2.5 Installation of Basic System or 2-shelf System (Floor Standing)