Installing the Basic Shelf and Expansion Shelf 1
To install the
Basic Shelf, attach the metal bracket (supplied with the Basic Shelf) to the base stands (supplied
with the optional Mounting Kit) first. Then, install the base stands on the floor and fix the Basic Shelf to it. To
install Expansion Shelf 1, attach the metal bracket (supplied with Expansion Shelf 1) to the Basic Shelf. Then,
mount Expansion Shelf 1 on the Basic Shelf.
Basic Shelf
1. Attach the support brackets to the base stands.
Note
If necessary, it is possible to reverse the direction of the base stands as shown below:
84 Installation Manual
2.2.7 Installation of 4-shelf System (Side-by-side Type)
To Next Page
Loading...
