Panasonic KX-UTG200

4. Press
On
.
Note
• Rejected phone numbers will not be stored in
the incoming or missed call log.
• Depending on the line a call is arriving on, the
call may not be rejected.
Rejecting specific calls
You can set the unit to reject specific phone numbers.
Note
• Rejected phone numbers will not be stored in
the incoming or missed call log.
Adding a phone number
You can store a maximum of 30 phone numbers you
want to reject in the rejection list of the unit.
1. On the Home screen, select
.
2. Press [ ] or [ ] to select "Basic Phone Settings",
and then press [ENTER].
3. Press [ ] or [ ] to select "Call Block", and then
press [ENTER].
4. Press
Add
.
5. Enter the telephone number (max. 32 digits), and
then press
Save
.
Note
• To register additional telephone numbers,
repeat the procedure from step 4.
Adding a phone number from the call log
You can add a phone number by referring to the call log.
1. On the Home screen, select
.
2. Press [
] or [ ] to select the log type, and then press
[ENTER].
3. Press [ ] or [ ] to select the entry with the phone
number you want to reject.
4. Press
Save
.
5. Press [ ] or [ ] to select "Call Block", and then
press [ENTER].
6. Press
Yes
.
Note
• You cannot perform this operation in "Placed
Calls" or on placed calls in "All Calls".
Editing a stored phone number
1. On the Home screen, select .
2. Press [
] or [ ] to select "Basic Phone Settings",
and then press [ENTER].
3. Press [ ] or [ ] to select "Call Block", and then
press [ENTER].
4. Press [ ] or [ ] to select the phone number you
want to edit, and then press
Edit
.
5. Edit the phone number as necessary, and then
press
Save
.
Deleting a stored phone number
1. On the Home screen, select
.
2. Press [
] or [ ] to select "Basic Phone Settings",
and then press [ENTER].
3. Press [ ] or [ ] to select "Call Block", and then
press [ENTER].
4. Press [ ] or [ ] to select the phone number you
want to delete, and then press
Delete
.
5. Press
Yes
.
Ignoring Calls
You can ignore incoming calls at your unit. The ringer
is muted when a call is ignored.
1. When receiving a call, press
Ignore
.
• To answer an ignored call, press
Answer
.
• To reject an ignored call, press
Reject
.
• To close the incoming call dialog, press
Close
.
24 Operating Instructions Document Version 2014-11
Feature Operations