1. Press the call button (flexible button) that
corresponds to the party you want to disconnect.
2. Press
.
• The party is disconnected.
• You can continue the conversation with the
remaining party.
Note
• For details about call buttons, see "Flexible
Buttons (Page 31)".
Ending a Conference Call
1. Go on-hook during a conference or press
.
Checking Messages
Checking New Messages
When you receive a voice message, is displayed
on the line button that received the call, and the
Message/Ringer lamp turns red.
You can check your new messages by accessing your
mailbox.
1. Press [MESSAGE].
2. If the unit has multiple lines, press [ ] or [ ] to select
the line button on which is displayed, and then
go off-hook.
28 Operating Instructions Document Version 2014-11
Feature Operations
To Next Page
Loading...
