Panasonic KX-UTG200

User Settings
You can configure various settings to customize the behavior of the unit.
This section explains how to configure the settings using the unit.
Accessing the Settings
1. On the Home screen, select .
2. Press [ ] or [ ] to select the desired setting category, and then press [ENTER].
3. Configure the settings as necessary.
Available Settings
The available settings depend on the user level you are logged in as (User or Admin). You can check you
current user level or change the user level in "Change Level" (see Page 54).
Basic Phone Settings
Menu Item Setting
Access
Level
*1
Ref.
U A
Date and Time Date
ü ü
Page 44
Date Template
ü ü
Page 44
Time
ü ü
Page 44
Use 12-hour Format
ü ü
Page 44
Ringtone —
ü ü
Page 45
Language —
ü ü
Page 45
Brightness —
ü ü
Page 45
Hotline Enable Hotline
ü ü
Page 45
Phone Number
ü ü
Page 45
Delay Time (0-10s)
ü ü
Page 45
Call Block —
ü ü
Page 46
Display Lock —
ü ü
Page 46
Key Click Tone —
ü ü
Page 46
ECO Mode —
ü ü
Page 47
Screen Saver Wait Time (0-10min)
ü ü
Page 47
*1
The access levels are abbreviated as follows:
U: User; A: Admin
A check mark indicates that the setting is available for that access level.
Document Version 2014-11 Operating Instructions 39
Customizing the Telephone