Installation and Setup
Notice
• Panasonic assumes no responsibility for injuries or property damage resulting from failures arising out of
improper installation or operation inconsistent with this documentation.
Attaching/Removing the Stand
Attaching the Stand
Notice
• If you place the display face down when you attach the stand, be sure to place a soft cloth under the
display. Failure to do so may result in damage to the display.
1. Insert the catches (
) of the stand into hooks located in the unit.
2. Gently push the stand in the direction indicated until it locks into place.
The stand will be mounted in the high position.
Removing the Stand
1. Hold the stand with both hands.
2. Gently rotate the stand in the direction indicated until it is released.
Document Version 2014-11 Operating Instructions 59
Installation and Setup
To Next Page
Loading...
