Panasonic KX-UTG200

Setting Sub-Setting Description Value Range Default
Enable IPv6
Privacy
Enable or disable privacy for
IPv6.
Yes, No No
IPv6 Address If DHCP is not enabled, you
must specify the IP address.
1-46 characters —
IPv6 Prefix
Length
If DHCP is not enabled, you
must specify the prefix length.
1-128 —
IPv6 Default
Gateway
If DHCP is not enabled, you
must specify the default
gateway.
1-46 characters —
IPv6 Auto DNS Enable or disable Auto DNS
for IPv6.
Yes, No Yes
IPv6 DNS1 If IPv6 Auto DNS is not
enabled, you can specify the
primary DNS server IP
address.
1-46 characters —
IPv6 DNS2 If IPv6 Auto DNS is not
enabled, you can specify the
secondary DNS server IP
address. Leave blank if a
secondary DNS server is not
used.
1-46 characters —
LLDP Settings
Setting
Description Value Range Default
Enable LLDP Enable or disable LLDP
*1
. Yes, No No
LLDP-MED Interval Timer
(5-3600s)
Specify the LLDP-MED
*1
interval
timer.
5-3600 seconds 30
*1
LLDP: Link Layer Discovery Protocol, MED: Media Endpoint Discovery
CDP Settings
Setting
Description Value Range Default
Enable CDP Enable or disable CDP. Yes, No No
CDP Interval Timer
(5-3600s)
Specify the CDP interval timer. 5-3600 seconds 30
50 Operating Instructions Document Version 2014-11
Customizing the Telephone