Panasonic KX-UTG200

Setting Sub-Setting Description
Value
Range
Default
Enable FWD No Ans Enable or disable forwarding of
incoming calls to a specified
destination if you do not answer
after a specified number of
rings.
On, Off Off
FWD No Ans Number Specify the number to forward
calls to when "Enable FWD No
Ans" is enabled.
1-32 digits —
FWD No Ans Ring
Count
Specify the number of times the
unit will ring before forwarding
the call.
0, 2-20 3
Block Anonymous
Call
— Enable or disable blocking of all
anonymous calls.
On, Off Off
Information Display
Setting
Description Value Range Default
Information Display View a variety of information about
the unit. Press [ ] and [ ] to display
the various settings. The following
settings can be viewed:
• Firmware Version
• MAC Address
• Serial Number
• Line status
• IP Address
• Subnet Mask
• Default Gateway
• DNS1
• DNS2
• IPv6 Address
• IPv6 Prefix Length
• IPv6 Default Gateway
• IPv6 DNS1
• IPv6 DNS2
• IP Phone VLAN ID
• PC VLAN ID
• IEEE802.1X Status
• Display Lock
— —
48 Operating Instructions Document Version 2014-11
Customizing the Telephone