Panasonic KX-UTG200

Network Test
Confirm whether other network devices (e.g., SIP server, routers, switching hubs) respond to network requests.
If a device does not respond, first check the unit's network settings, and then check the device's network
settings and connection.
Setting Description Value Range Default
IP Address Enter the IPv4 address of the device
to which you want to test the
connection, and then press
Ping
.
xxx.xxx.xxx.xxx —
IPv6 Address Enter the IPv6 address of the device
to which you want to test the
connection, and then press
Ping
.
1-46 characters —
Change Level
You can check the user level from the user level displayed at the top of the screen and change the user level
by entering a user ID and password. The available settings differ depending on the user level.
Setting
Description Value Range Default
User ID Enter the user ID. 6-16 —
Password Enter the user password. 6-16 —
Reset
Setting
Description Value Range Default
Exclude Private Settings Reset all settings excluding private
settings (Page 70). Private settings
include ringtone volume, brightness,
phonebook, and call history.
— —
Exclude Network Settings Reset all settings excluding network
settings (Page 70). Private settings
are also reset when Exclude Network
Settings is executed.
— —
Restart
Setting
Description Value Range Default
Restart Restart the unit (Page 70). — —
54 Operating Instructions Document Version 2014-11
Customizing the Telephone