When connecting the Ethernet cable
• Connect the cables as shown in the following illustration.
Ethernet cableEthernet cable
• Use the included Ethernet cable.
When connecting to a switching hub
• If PoE is available, an AC adaptor is not needed.
• This unit complies with the PoE Class 2 standard.
When connecting a PC
• Only a PC can be connected to the PC port. Other SIP phones, or network devices such as routers
or switching hubs, cannot be connected.
• The PC port does not support PoE for connected devices.
When connecting cables and the AC adaptor
• Ensure that the Ethernet cables and the AC adaptor cord are clamped to prevent damage to the
connectors.
Document Version 2014-11 Operating Instructions 63
Installation and Setup
To Next Page
Loading...
