Panasonic KX-WP1050 User Manual (English)

Other manuals for Panasonic KX-WP1050

Questions and Answers:

K
kurtgreerAug 11, 2025
Why can't my Panasonic KX-WP1050 connect to the internet?
- T
  Tiffany WrightAug 11, 2025
  If your Panasonic Cordless Telephone cannot connect to the internet, verify the modem connection and also check the connection between the product and the LAN. Review the information from your internet service provider regarding the internet connection. If instructed by your provider, configure the web browser proxy server. Note that if the power is cut while connected to the internet using PPPoE, it might take several minutes to reconnect. Ensure that the power supply was turned on in the correct order: modem, router, base unit, computer. When turning off the power supply, do so in the following order: modem, base unit, router (if you have one), computer.
M
Mary AguirreAug 18, 2025
What to do if initialization wizard is not displayed on Panasonic KX-WP1050?
- W
  wwattsAug 18, 2025
  If the Initialization Wizard is not displayed, it may be due to the state of the LAN, so dialog boxes may not be displayed immediately. Check that the LAN or WIRELESS indicator lights in green, and ensure the LAN card or wireless LAN card is on. If not, verify the LAN is connected. Make sure the power supply was turned on in the proper sequence: modem, router, base unit, computer. When turning off the power supply, do so in the reverse order: modem, base unit, router (if you have one), computer.
C
Curtis EdwardsAug 26, 2025
What to do if Ethernet is connected but the LAN indicator is off on Panasonic KX-WP1050?
- M
  Mitchell AlexanderAug 26, 2025
  If the Ethernet is connected but the LAN indicator is off, check the computer connection and ensure the computer's power is on. Also, verify that the LAN card and driver are installed on the computer. Check the modem connection and the connection between the product and the LAN. Review the internet connection information from your internet service provider. If instructed, set the web browser proxy server. If the power is cut when connected to the Internet using PPPoE, allow a few minutes for reconnection. Confirm the power supply was turned on in the following order: modem, router, base unit, computer. When turning off the power supply, do so in the following order: modem, base unit, router (if you have one), computer.
T
Tanya BoothSep 2, 2025
How to fix WAN indicator off on Panasonic KX-WP1050?
- J
  James TurnerSep 2, 2025
  If the modem is connected but the WAN indicator is off, ensure that the modem and the Panasonic Cordless Telephone are properly connected and that the power to both the modem and the telephone are turned on.

Panasonic KX-WP1050 Specifications

General

Display	LCD
Handsets supported	Up to 6
Intercom	Yes
Speakerphone	Yes
Phonebook entries	50
Ringer ID	Yes
Call Waiting	Yes
Type	Cordless Phone
Range	Up to 1000 feet
Features	Caller ID, Call Waiting, Speakerphone, Intercom
Number of Handsets	1
Power Source	AC Adapter