Getting Started
For assistance, please visit http://www.panasonic.com/phonehelp 27
Setting the base unit for the first time (Initialization
Wizard)
You can log in the base unit and configure the unit’s settings using a Web browser on your
computer connected to the “LAN” port on the base unit.
Important:
L Recommended Web browser:
Microsoft Internet Explorer 6.0 or higher for Windows
Mozilla Firefox 1.5 or higher for Windows
L Make sure the base unit and handset are not being used.
L Change the appropriate setting for your network configuration.
If you access the base unit for the first time or after resetting the network settings (page
134, 145), you must set the user name and password first in Initialization Wizard so that
you can access the base unit using them. After that, you need to configure the network
settings you use for HOME and HOTEL modes.
For example, if you register AP (Bridge) setting for HOME mode and DHCP setting for
HOTEL mode, you can connect to the Internet in AP (Bridge) or DHCP mode just by
switching the Mode selector (page 144) to HOME or HOTEL from the next time.
To Next Page
Loading...
