Base Unit Settings
100 For assistance, please visit http://www.panasonic.com/phonehelp
Modifying the wireless information
1 Click [Network Connection] on Top Menu.
2 Click [Modify] under the Wireless Information heading.
3 Configure the wireless connection basic settings, then click [Next>].
4 Configure the wireless connection security settings, then click [Save].
5 Click [Restart].
Setting Description
[Mode] L Select your wireless network mode from the pull-down menu.
[Channel] L Select [Auto] or the desired channel from [1] to [11].
[Network Name
(SSID)]
L Enter your wireless network name (SSID) in this data field.
[Broadcast SSID] L Enable or disable the setting to broadcast your SSID.
Setting Description
[Security Mode] L Select the desired Security Mode.
[WPA-PSK/WPA2-
PSK Data
Encryption]
L Select the desired Data Encryption method.
[Network key] L Enter the network key containing 10 hexadecimal, 26
hexadecimal, 5 alphanumeric or 13 alphanumeric
characters.
L Press [View] to display the network key.
[Session-Key
renewal interval]
L Set the interval for refreshing the encryption key between 30
and 604800 seconds. 604800 seconds is the equivalent of
one week.
[Key Index] L Select [Key 2] or [Key 3] to be used if you use WEP.
To Next Page
