Getting Started
48 For assistance, please visit http://www.panasonic.com/phonehelp
WAN Green On An Internet connection has been
established (IP address obtained).
Flashing A data transfer is in progress on the WAN
side.
Red Flashing The base unit hardware may be defective.
L Visit
http://www.panasonic.com/phonehelp
Amber On An Internet connection has yet to be
established (No IP address obtained).
Flashing The base unit firmware may be defective
and requires a firmware update.
L See “Setting the static IP address on
your computer” on page 148 for details.
Green/
Amber
Alternately
flashing
The IP addresses on the LAN and WAN
sides overlap.
L The network configuration of the LAN
side will be temporarily changed to avoid
the overlap of the LAN and WAN
networks. During this time, Port
Forwarding, DMZ, Packet Filtering and
Static Routing functions are disabled. To
activate those functions, change the LAN
network configuration.
Off – The Ethernet cable is not connected to the
Internet (WAN) port on the rear of the base
unit. Connect it.
Indicator
type
Indicator
color
Indicator
pattern
Status
To Next Page
Loading...
