14. Menu Guide
310
[Focus] ¨ ¨
[Focus Peaking]
`[ON]/[OFF]
—
[SET] [Focus Peaking
Sensitivity]
[Display Color]
[Display While AFS]
During MF operation, in-focus portions (portions
on the screen with clear outlines) are highlighted
with color.
0 If the [Focus Peaking Sensitivity] is adjusted to
the negative direction, portions to be highlighted
are reduced, allowing you to achieve a more
precise focus.
0 With [Display Color], you can set the display
color of the in-focus portion.
0 If [Display While AFS] is set to [ON], when the
shutter button is pressed halfway in focus mode
[AFS], you can display Peaking.
0 You can display the Touch Tab (l 333) and then
touch [ ] in [ ] to switch [ON]/[OFF].
0 When [Rough Monochrome] of [Filter Settings]
is being used, [Focus Peaking] is not available.
0 When [Live View Boost] is being used, [Focus
Peaking] is not available.
0 This menu item can be registered to the Fn
button. (l 279)
To Next Page
Loading...
