Panasonic Lumix DC-S1 User Manual

15. Wi-Fi/Bluetooth
414

[WPS (PIN code)]
Enter a PIN code into the wireless access point to set up a connection.
1
On the camera screen, select the wireless access point you are
connecting to.
2
Enter the PIN code displayed on the camera screen into the wireless
access point.
3
Press or of the camera.

[From List]
Searches for a wireless access point to use, and connects to this.
1
Select the wireless access point you
are connecting to.
0
Press [DISP.] to run a wireless access point
search again.
0 If no wireless access point is found, refer to
“Connecting by Manual Input” on page 415.
2
(If network authentication is encrypted)
Enter the encryption key.
0
For information on how to enter characters, refer to page 369.
0 WPS is a function that allows you to easily configure the settings related to the
connection and security of wireless LAN devices.
For details about the operation and compatibility of WPS, refer to the
operating instructions for the wireless access point.
0 Confirm the encryption key of the wireless access point.

Panasonic Lumix DC-S1 Specifications

General

Camera Type	Mirrorless
Sensor Type	CMOS
Resolution	24.2MP
Sensor Size	35.6 x 23.8 mm (Full-Frame)
Image Processor	Venus Engine
ISO Range	100-51200 (expandable to 50-204800)
Lens Mount	Leica L
Autofocus Points	225
Viewfinder Type	Electronic
Screen Size	3.2 inches
Screen Type	Tilting Touchscreen LCD
Battery	DMW-BLJ31
Weather Sealing	Yes
Shutter Speed	1/8000 to 60 sec
Continuous Shooting	9 fps
Image Stabilization	5-axis sensor-shift image stabilization
Viewfinder Resolution	5.76 million dots
Screen Resolution	2.1 million dots
Video Resolution	4K UHD at 60p
Storage Media	SD/SDHC/SDXC (UHS-II compliant)
Connectivity	Wi-Fi, Bluetooth
Battery Life	400 shots (CIPA)
Dimensions	148.9 x 110.0 x 96.7 mm
Weight	1, 021 g (with battery and memory card)