Panasonic Lumix DC-S1 User Manual

15. Wi-Fi/Bluetooth
413
[WPS (Push-Button)] (l 413)
Press the WPS button on the wireless access
point to set up a connection.
[WPS (PIN code)] (l 414)
Enter a PIN code into the wireless access point to
set up a connection.
[From List] (l 414)
Searches for a wireless access point to use, and
connects to this.
0 After selecting [Via Network] once, the camera will connect to the previously-
used wireless access point.
To change the wireless access point used for connection, press [DISP.] and
change the connection destination.

[WPS (Push-Button)]
Press the WPS button on the wireless access
point to set up a connection.
Press the wireless access point WPS button until
it switches to WPS mode.
Example)

Panasonic Lumix DC-S1 Specifications

General

Camera Type	Mirrorless
Sensor Type	CMOS
Resolution	24.2MP
Sensor Size	35.6 x 23.8 mm (Full-Frame)
Image Processor	Venus Engine
ISO Range	100-51200 (expandable to 50-204800)
Lens Mount	Leica L
Autofocus Points	225
Viewfinder Type	Electronic
Screen Size	3.2 inches
Screen Type	Tilting Touchscreen LCD
Battery	DMW-BLJ31
Weather Sealing	Yes
Shutter Speed	1/8000 to 60 sec
Continuous Shooting	9 fps
Image Stabilization	5-axis sensor-shift image stabilization
Viewfinder Resolution	5.76 million dots
Screen Resolution	2.1 million dots
Video Resolution	4K UHD at 60p
Storage Media	SD/SDHC/SDXC (UHS-II compliant)
Connectivity	Wi-Fi, Bluetooth
Battery Life	400 shots (CIPA)
Dimensions	148.9 x 110.0 x 96.7 mm
Weight	1, 021 g (with battery and memory card)