17. Materials
467
0 In the [Setup] ([Setting]) menu, [Reset], reset network settings. (l 76)
However, all information set in [Wi-Fi Setup] and [Bluetooth] will also be reset.
(With the exception of [LUMIX CLUB])
0 Confirm the connection with the TV. (l 426)
0 Set the TV input to HDMI input.
0 Depending on the [Aspect Ratio], gray bands may be displayed on the top and
bottom or the left and right of the images. You can change the band color in
[Background Color(Playback)] in [TV Connection] of the [Setup] ([IN/OUT]) menu.
(l 358)
0 Check that the [VIERA Link (CEC)] of the camera is set to [ON]. (l 357)
0 Check the VIERA Link setting on the connected device.
0 Turn off and on the camera.
0 Set the [USB Mode] of the camera to [PC(Storage)]. (l 355)
0 Turn the camera off and on.
I have forgotten the password for the Wi-Fi.
TV, PC, Printer
No image on the TV.
The TV screen is blurry or not colored.
The TV images are displayed with gray bands.
VIERA Link is not working.
Cannot communicate with the PC.
To Next Page
Loading...
