199
9. Using Menu Functions
Applicable modes:
You can adjust the brightness of bright and dark portions on an image while checking the
brightness on the screen.
1 Rotate the front/rear dial to adjust the brightness of
bright/dark portions.
A Bright portion
B Dark portion
C Preview display
• The rear dial is for adjusting dark areas, and the front
dial is for adjusting bright areas.
• To register a preferred setting, press 3, and select the
destination where the custom setting will be registered to
([Custom1] (
)/[Custom2] ( )/[Custom3] ( )).
• Adjustments can also be made by dragging the graph.
2 Press [MENU/SET].
[Highlight Shadow]
> [Rec] > [Highlight Shadow]
(Standard) A state with no adjustments is set.
(Raise the contrast) Bright areas are brightened, and dark areas are darkened.
(Lower the contrast) Bright areas are darkened, and dark areas are brightened.
(Brighten dark areas) Dark areas are brightened.
// (Custom) Registered custom settings can be applied.
• The screen display can be switched by pressing [DISP.] on the brightness adjustment screen.
• Turning off this unit will return the setting adjusted with / //
back to the default
setting.
MENU
To Next Page
Loading...
